GB/T 6745-2008Topside paint (English PDF)

1 Scope

This standard specifies the hull paint requirements, test methods, inspection rules, marking, packaging, transportation and storage.

This standard applies to coated exterior of the building above the waterline of the ship loaded with used paint can be used for the mast and lifting machinery coating.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent

Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research

Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

Representation GB/T 1250-1989 and method of determining the limit values

GB/T 1725-2007 Paints, varnishes and plastics - Determination of volatile matter content is not (ISO 3251.2003, IDT)

GB/T 1727-1992 Film General Preparation Method

GB/T 1728-1979 paint, putty film drying time assay

GB/T 1731-1993 Determination of film flexibility

GB/T 1765-1979 Determination of resistance to humidity, salt spray, weather resistance (artificial acceleration) Preparation of the film

GB/T 1766-1995 Paints and varnish coating aging rating method (neq ISO 4628-1. 1980)

GB/T 1771-2007 Paints and varnishes - Determination of resistance to neutral salt spray (ISO 7253.1996, IDT)

GB/T 1865-1997 Paints and varnishes - Artificial weathering and exposure to artificial radiation (filtered xenon arc radiation) (eqv ISO 11341.

1994)

GB/T 3186 Paints, varnishes and raw materials for paints and varnishes - Sampling (GB/T 3186-2006, ISO 15528.2000, IDT)

GB/T 5210-2006 Paints and varnishes - Pull - off adhesion test (ISO 4624.2002, IDT)

GB/T 6748 General technical requirements for marine rust

GB /Paints, varnishes and printing inks T 6753.1-2007 Determination of fineness of grind (ISO 1524.2000, IDT)

GB/T 9271-1988 Paints and varnishes - Standard panels for (eqv ISO 1514. 1984)

GB/T 9276-1996 Test method for exposure to natural weathering coating (eqv ISO 2810)

GB/T 9278 paint sample conditioning and testing temperature and humidity (GB/T 9278-2008, ISO 3270. 1984, Paintsand varnishesandtheirrawmaterials-Temperaturesandhumiditiesforconditioningandtesting, IDT)

GB/T 9750-1998 paint product packaging logo

GB/T 9754-2007 Paints and varnishes contain metallic paint films of 20 °, 60 ° and 85 ° specular gloss measurement (ISO 2813.1994, IDT)

GB/T 10834 Determination ship paint salt water brine and hot salt water immersion method

GB/T 13491-1992 General Paint Pack

GB/T 14522-1993 machinery and industrial products for plastics, paints, rubber artificial climate accelerated test methods

GB/T 20624.1-2006 Paints and varnishes - Rapid - deformation (impact resistance) tests - Part 1. Falling-weight test (large red

Head) (ISO 6272-1.2002, IDT)

HG/T 2458-1993 coatings inspection, transport and storage General

3 Requirements

The product should meet the technical requirements of Table 1, supporting the primer shall comply with GB/T 6748's.