GB/T 6548-2011Corrugated fiberboard - Determination of ply adhesive strength (English PDF)
瓦楞纸板粘合强度的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6548-2011 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2011
Implementation date
September 15, 2011
Scope
GB/T 6548-2011 is the English-translated version of 瓦楞纸板粘合强度的测定.
GB/T 6548-2011 is the Chinese standard "Corrugated fiberboard - Determination of ply adhesive strength". Its scope clause reads: This standard specifies the method for the determination of corrugated board adhesive strength.
This standard applies to the determination of the adhesive strength of various types of corrugated board. Its clauses include terms and definitions; instruments.
Found what you need?
Document preview — GB/T 6548-2011
National Standard of the People's Republic of China
- ICS
- 85.010
- Classification
- Y 30
- Replacing
- GB/T 6548-1998
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5 Instruments
1 Scope
This standard specifies the method for the determination of corrugated board adhesive strength.
This standard applies to the determination of the adhesive strength of various types of corrugated board.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186.
2002, MOD)
GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187.
1990)
GB/T 22876 paper, cardboard and corrugated board compression tester description and calibration (GB/T 22876-2008, ISO 13820.
1996, MOD)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1 Adhesive strength
Under test conditions, the separation unit length flute corrugated board adhesive line force required in Newtons per meter (N/m) represents.
Principle 4
The needle attachment (the release frame) into the sample surface and fluting (Lane) between the paper (or between the paper and the paper flute), and then inserted the needle sample
Shaped attachment (the release frame) pressure to do relative motion, which is measured separately separate part of the required maximum force.
5 Instruments
5.1 compression tester
Compression tester shall comply with GB/T 22876 of.
5.2 CD-like device
Cutout device can use an electric, pneumatic or manual sample preparation tool, but it should be neat trimming specimens, and perpendicular to the corrugated board.
5.3 release frame
5.3.1
release is made on the frame attachment portion and a lower portion of annexes, it is means for applying a uniform pressure on the adhesive portion of each sample. Each section
Annex inserted by the equidistant between flute corrugated board voids pin member and the support member composition, see Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 6543-2025Single and double corrugated boxes for transport packages
- CY/T 210-2020Corrugated board flexographic printing process control requirements
- GB/T 16606.2-2018Packings for express service - Part 2: Packing box
- YC/T 137-2014Package of redried strips. Corrugated carton
- YC/T 137.1-2004Package of redried strips. Corrugated carton
- YC/T 137.1-1998Package of redried strips. Corrugated carton
Similar standards
Editions of GB/T 6548
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6548-2011 | Corrugated fiberboard - Determination of ply adhesive strength | current edition | Current |
| GB/T 6548-1998 | Corrugated fiberboard - Determination of ply adhesive strength | previous edition | Superseded |
This page sells the current edition, GB/T 6548-2011. Earlier editions are listed for reference only.
How to Download GB/T 6548-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6548-2011
$105.00