GB/T 6073-2010Type LT highly flexible friction clutch (English PDF)
LT 型高弹性摩擦离合器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6073-2010 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 9, 2010
Implementation date
December 1, 2010
Scope
GB/T 6073-2010 is the English-translated version of LT 型高弹性摩擦离合器.
GB/T 6073-2010 is the Chinese standard "Type LT highly flexible friction clutch".
Its scope clause reads: This standard specifies the operating pressure of 0.7MPa ~ 0.8MPa double cone with high elastic rubber elastic ring pneumatic dry friction clutch Clutch (hereinafter referred to as "LT clutch") product classification, requirements, test methods, inspection rules and signs, packaging and storage.
This standard applies to connecting coaxial driving and driven shafts, has a relative offset compensation and vibration cushioning properties of marine, land power unit Set the clutch design, manufacture and acceptance. Its clauses include classification and marking.
Found what you need?
Document preview — GB/T 6073-2010
National Standard of the People's Republic of China
- ICS
- 47.020.20
- Classification
- U 48
- Replacing
- GB/T 6073-1985
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Classification and Marking
- 3.1 Product Marking
1 Scope
This standard specifies the operating pressure of 0.7MPa ~ 0.8MPa double cone with high elastic rubber elastic ring pneumatic dry friction clutch
Clutch (hereinafter referred to as "LT clutch") product classification, requirements, test methods, inspection rules and signs, packaging and storage.
This standard applies to connecting coaxial driving and driven shafts, has a relative offset compensation and vibration cushioning properties of marine, land power unit
Set the clutch design, manufacture and acceptance.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1348 ductile iron (GB/T 1348-2009, ISO 1083.2004, MOD)
GB/T 2496 elastic coupling ring
GB/T 4879 rust-proof packaging
GB 5763-1998 automobile brake linings (neqJISD4411.1993)
GB/T 9239.1-2006 mechanical vibration steady state (rigid) rotor balance quality requirements - Part 1. specification of tolerance and balance
Inspection (ISO 1940.1.2003, IDT)
CB/T 778-1986 marine diesel engine forgings technical conditions
3 Classification and Marking
3.1 Product Marking
3.1.1 marking method
Model LT provisions clutch is as follows.
LT clutch Code
Nominal torque of the code, with the number Nm 1/100 representation
3.1.2 tag example
Nominal torque 16000N · m of LT clutch labeled as follows.
Clutch GB/T 6073-2010 LT160.
3.2
product model, the main performance parameters, structure and shape and size of installation and connection
3.2.1
LT clutch Model and main performance parameters should meet the requirements of Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 6073
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6073-2010 | Type LT highly flexible friction clutch | current edition | Current |
| GB/T 6073-1985 | Type LT highly flexible friction clutch | previous edition | Superseded |
This page sells the current edition, GB/T 6073-2010. Earlier editions are listed for reference only.
How to Download GB/T 6073-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6073-2010
$165.00