GB/T 553-2012Painting and marking of chain cables (English PDF)

3.1 painted rust

3.1.1

anchor before painting should be rust, iron oxide and waste, and all cleaned.

3.1.2

chain through clean, the paint coating the asphalt or coal tar pitch black epoxy coatings, film thickness and raw materials by manufacturers when ordering agreement

To make clear that in the book, when the delivery of the ship in the shipyard film thickness of not less than 100µm.

3.1.3

dipping method when painting, should not make the front anchor flag.

3.1.4

painted using brushing method should be ready after the chain flag, the second time brushing should be painted black asphalt paint or epoxy paint, among

Time interval should refer to the paint manufacturer's instructions, the link should not do sign painted black asphalt paint or epoxy paint.

3.2 anchor logo and flag painted paint

3.2.1

In order to be able to determine when the anchor chains throw in a few outboard section, shall be marked on the chain link.

3.2.2

The entire chain is divided into a number of links, the end of the anchor calculate backwards from the end of the chain links from each 27.5m as a link.

3.2.3

be marked and painted the entire chain in the following manner (Figure 1).

figure 1

--- Represents the first link in the chain connecting ring around the first link and the second link between the first rungs on the links is about to stainless steel,

And on the front and back of each one link all coated with white paint waterline, connecting link waterline painted in red paint.

--- Represents the second link in the chain link connecting the front and rear of the second link and the third link between the first two rungs on the link around the stainless steel strip,

And two each on the front and rear link all coated with white paint waterline, connecting link waterline painted in red paint.

--- Represents the third link in the front and rear link connecting the third and fourth links between the links of the first three rungs on the link around the stainless steel strip,

And before and after each of three chain rings on all coated with white paint waterline, connecting link waterline painted in red paint.