GB/T 5370-2007Method for testing antifouling panels in shallow submergence (English PDF)
防污漆样板浅海浸泡试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 5370-2007 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 11, 2007
Implementation date
April 1, 2008
Scope
GB/T 5370-2007 is the English-translated version of 防污漆样板浅海浸泡试验方法.
GB/T 5370-2007 is the Chinese standard "Method for testing antifouling panels in shallow submergence". Its scope clause reads: This standard specifies the test apparatus antifouling panels in shallow submergence test methods, specimen preparation, test procedures, performance evaluation.
This standard applies to ships, offshore engineering structures with shallow immersion antifouling performance assessment. Its clauses include terms and definitions; test device.
Found what you need?
Document preview — GB/T 5370-2007
National Standard of the People's Republic of China
- ICS
- 87.040
- Classification
- G 50
- Replacing
- GB/T 5370-1985
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 test device
1 Scope
This standard specifies the test apparatus antifouling panels in shallow submergence test methods, specimen preparation, test procedures, performance evaluation.
This standard applies to ships, offshore engineering structures with shallow immersion antifouling performance assessment.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 8923 steel surface before painting Rust grades and preparation grades (GB/T 8923-1988, eqv ISO 8501-1. 1988)
3 Terms and Definitions
3.1
The antifouling paint model immersed in shallow water, regular observation of marine fouling organisms attached to the breed, the coating weight and reproduction degree model,
While comparing with the blank template, and an experimental method of antifouling performance evaluation based on the results of observation.
3.2
Ability to prevent adhesion of marine fouling organisms and reproduction.
3.3
Since the model edges vulnerable to damage, paint thinner, causing paint damage or premature adhesion of marine fouling organisms arising from the results of assessment
Given the impact.
4 test device
4.1 Floating Raft
4.1.1
soak test can be performed on a floating raft seawater circulation of steel, wood, reinforced concrete structure.
4.1.2
floating raft moored put in place should the Gulf seas biological growth vigorous, seawater flow is less than 2m/s, the work should not be placed or estuarine
Industry sewage serious waters.
4.2 Framework
The frame material should be used cross-sectional dimension of not less than 25mm × 25mm × 3mm angle iron or other suitable material. The angle iron welded into
3 files frame. As shown in Figure 1. Angle surface after rust should rust and paint antifouling paint.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 5370
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 5370-2007 | Method for testing antifouling panels in shallow submergence | current edition | Current |
| GB/T 5370-1985 | Method for testing antifouling panels in shallow submergence | previous edition | Superseded |
This page sells the current edition, GB/T 5370-2007. Earlier editions are listed for reference only.
How to Download GB/T 5370-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 5370-2007
$85.00