Valid

GB/T 5338.1-2023Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (61 pages)

Need quotation for your management?

Get a formal quotation for GB/T 5338.1-2023 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Recommended

Issue date

May 23, 2023

Implementation date

September 1, 2023

Scope

GB/T 5338.1-2023 (Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes) is available as an English-translated PDF.

GB/T 5338.1-2023 is the Chinese standard "Series 1 freight containers - Specification and testing - Part 1: General cargo containers for general purposes".

Its scope clause reads: 1:1 This document specifies ISO series 1 for all closed general-purpose containers and certain special-purpose containers (closed, ventilated, ventilated or Open top) basic technical requirements and test methods: These containers are suitable for international circulation, as well as road, rail and sea transport, including in Intermodal transport between these modes of transport: 1:2 The container types applicable to this document are listed in Table 1: Table 1 Container Type code box group code G General purpose container GP without ventilation V Universal container VH with ventilation U open top box UT B Unpressurized dry bulk container, box type BU S container SN named after the cargo This document does not include requirements for venting and ventilation: 1:3 ISO 6346 stipulates the requirements for relevant markings:. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 5338.1-2023

National Standard of the People's Republic of China

ICS: 55.180.10
Classification: A 85
Replacing: GB/T 5338-2002

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
Introduction
1 Scope
2 Normative references
3 Terms and Definitions
4 Dimensions and rated masses
5 Design requirements
6 test
Appendix A (Normative) Strength Test Schematic of Various Types and Sizes of Universal Containers
Appendix B (Normative) Dimensions of fork pockets
Appendix C (Normative) Solid Cargo System
Appendix D (Normative) Barrier System

1 Scope

1:1 This document specifies ISO series 1 for all closed general-purpose containers and certain special-purpose containers (closed, ventilated, ventilated or

Open top) basic technical requirements and test methods: These containers are suitable for international circulation, as well as road, rail and sea transport, including in

Intermodal transport between these modes of transport:

1:2 The container types applicable to this document are listed in Table 1:

Table 1 Container Type code box group code

G General purpose container GP without ventilation

V Universal container VH with ventilation

U open top box UT B Unpressurized dry bulk container, box type BU S container SN named after the cargo

This document does not include requirements for venting and ventilation:

1:3 ISO 6346 stipulates the requirements for relevant markings:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references

For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document:

Note: GB/T 1413-2023 Series 1 Container Classification, Dimensions and Rated Mass (ISO 668:2020, IDT)

Note: GB/T 1992-2023 container terms (ISO 830:1999, MOD) mediate fittings-Specifications)

Note: GB/T 1835-2006 Series 1 Container corner fittings (ISO 1161:1984, MOD)

Note: GB/T 1836-2017 Container Code, Identification and Marking (ISO 6346:1995, IDT)

3 Terms and Definitions

The terms and definitions defined in ISO 830 apply to this document:

GB/T 191 | GB/T 1413 | GB/T 3220 | GB/T 4995 | GB/T 5338.5 | GB/T 5338.4 | […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 61 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 668 · ISO 830 · ISO 1161 · ISO 6346

Cited by

How to Download GB/T 5338.1-2023

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.