GB/T 4909.7-2009Test methods for bare wires - Part 7: Mandrel winding test (English PDF)
裸电线试验方法 第7部分:卷绕试验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4909.7-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 19, 2009
Implementation date
December 1, 2009
Scope
GB/T 4909.7-2009 is the English-translated version of 裸电线试验方法 第7部分:卷绕试验.
GB/T 4909.7-2009 is the Chinese standard "Test methods for bare wires - Part 7: Mandrel winding test". Its scope clause reads: GB/T 4909 provisions of this part of the test equipment of bare wire winding test, specimen preparation, measurement procedures, test results and commentary Set and so on.
Profiled conductor feature size Rao <=20.0mm (such as contact line, etc.) of the winding performance. This test method is to test bar specimens wound around a predetermined number of turns in diameter, observed changes in their surface.
Can be re-winding type Complex wound or a wound. This section should be used in conjunction with the GB/T 4909.1-2009. Its clauses include test equipment.
Found what you need?
Document preview — GB/T 4909.7-2009
National Standard of the People's Republic of China
- ICS
- 29.060.10
- Classification
- K 11
- Replacing
- GB/T 4909.7-1985
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
GB/T 4909 provisions of this part of the test equipment of bare wire winding test, specimen preparation, measurement procedures, test results and commentary
Set and so on.
Profiled conductor feature size Rao <=20.0mm (such as contact line, etc.) of the winding performance.
This test method is to test bar specimens wound around a predetermined number of turns in diameter, observed changes in their surface. Can be re-winding type
Complex wound or a wound.
This section should be used in conjunction with the GB/T 4909.1-2009.
2 Normative references
The following documents contain provisions which, through reference to GB/T 4909 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 4909.1-2009 Test methods for bare wires - Part 1. General
3 Test Equipment
Wrapping test apparatus as shown in Figure 1. The test bar should have sufficient rigidity, surface finish.
1 --- jig;
2 --- specimen;
3 --- test bars;
4 --- guides;
5 --- test rod holder;
F --- tension.
Figure 1 Schematic winding test device […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 4909.7
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4909.7-2009 | Test methods for bare wires - Part 7: Mandrel winding test | current edition | Current |
| GB/T 4909.7-1985 | Test methods for bare wires - Part 7: Mandrel winding test | previous edition | Superseded |
This page sells the current edition, GB/T 4909.7-2009. Earlier editions are listed for reference only.
How to Download GB/T 4909.7-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4909.8-2009 — Test methods for bare wires - Part 8: Hardness test - Brinell hardness test
GB/T 4909.6-2009 — Test methods for bare wires - Part 6: Bend test - Single bend test
GB/T 4909.9-2009 — Test methods for bare wires - Part 9: Test for continuity of coating - Sodium polysulfide solution method
Secure payment via Stripe
Payments accepted
GB/T 4909.7-2009
$70.00