GB/T 4857.15-2017Packaging—Basic tests for transport packages—Part 15: Controlled horizontal impact test method (English PDF)
包装 运输包装件基本试验 第15部分：可控水平冲击试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4857.15-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 4857.15-2017 is the English-translated version of 包装 运输包装件基本试验 第15部分：可控水平冲击试验方法.
GB/T 4857.15-2017 is the Chinese standard "Packaging—Basic tests for transport packages—Part 15: Controlled horizontal impact test method". Its scope clause reads: GB/T 4857 provisions of this part of the level of impact through the control input level impact test equipment used in the main Can request, test procedures and test reports.
This section applies to assess the impact of transport packages in the horizontal impact strength and packaging of the contents of the protection. This is true The test can be either a single test or as part of a series of tests on a package. Its clauses include terms and definitions; test principle.
Found what you need?
Document preview — GB/T 4857.15-2017
National Standard of the People's Republic of China
- ICS
- 55.020
- Classification
- A 83
- Replacing
- GB/T 4857.15-1999
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 test principle
1 Scope
GB/T 4857 provisions of this part of the level of impact through the control input level impact test equipment used in the main
Can request, test procedures and test reports.
This section applies to assess the impact of transport packages in the horizontal impact strength and packaging of the contents of the protection. This is true
The test can be either a single test or as part of a series of tests on a package.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 4857.1 packaging and transport packaging parts of the test method of labeling
Packaging - Transport packages - Basic test - Part 2. Temperature and humidity conditioning
GB/T 4857.17 package transport packages preparation performance test program general principles
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Backload load backload
Impact, the test sample received by the pressure of the rear.
3.2 Backload device
Simulated devices that are the same or similar to the test sample or that simulate the load on the rear of the test package in a transport vehicle.
3.3 Pulse program device
Impact impulse test machine control the pulse parameters (such as pulse waveform, peak acceleration and duration, etc.) of the device.
4 test principle
The test sample according to a predetermined state, the test equipment impact at a certain impact speed, the test sample to withstand pulse programmer
Predetermined impact pulse produced, test principle shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 4857.15
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4857.15-2017 | Packaging—Basic tests for transport packages—Part 15: Controlled horizontal impact test method | current edition | Current |
| GB/T 4857.15-1999 | Packaging—Basic tests for transport packages—Part 15: Controlled horizontal impact test method | previous edition | Superseded |
This page sells the current edition, GB/T 4857.15-2017. Earlier editions are listed for reference only.
How to Download GB/T 4857.15-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4857.17-2017 — Packaging -- Basic tests for transport packages -- Part 17: General rules for the compilation of performance test
GB/T 4857.14-1999 — Packaging. Transport packages. Toppling test method
GB/T 4857.19-1992 — Packaging. Transport packages. Information to be recorded in distribution trials
Secure payment via Stripe
Payments accepted
GB/T 4857.15-2017
$145.00