GB/T 4678.10-2017Diecasting dies - Components - Part 10: Ejector guide bush (English PDF)
压铸模 零件 第10部分：推板导套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4678.10-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 4678.10-2017 is the English-translated version of 压铸模 零件 第10部分：推板导套.
GB/T 4678.10-2017 is the Chinese standard "Diecasting dies - Components - Part 10: Ejector guide bush". Its scope clause reads: GB/T 4678 provisions of this part of the die casting die guide plate with the type and size, requirements, materials and markings.
This section applies to die-casting mold with push-plate guide sleeve. Its clauses include structure and size.
Found what you need?
Document preview — GB/T 4678.10-2017
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J 46
- Replacing
- GB/T 4678.10-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
GB/T 4678 provisions of this part of the die casting die guide plate with the type and size, requirements, materials and markings.
This section applies to die-casting mold with push-plate guide sleeve.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1801-2009 Geometrical Product Specifications (GPS) Limits and Tolerances and Matching Options
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance
GB/T 4679 die casting mold parts technical conditions
3 structure and size
Push plate guide sleeve structure shown in Figure 1, the size shown in Table 1.
Note. The surface roughness is not noted Ra3.2µm; not note chamfered 0.5mm × 45 °.
a wheel more groove or round.
Figure 1 Push plate guide sleeve […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of GB/T 4678.10
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 4678.10-2017 | Diecasting dies - Components - Part 10: Ejector guide bush | current edition | Current |
| GB/T 4678.10-2003 | Diecasting dies - Components - Part 10: Ejector guide bush | previous edition | Superseded |
This page sells the current edition, GB/T 4678.10-2017. Earlier editions are listed for reference only.
How to Download GB/T 4678.10-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 4678.1-2017 — Diecasting dies—Components—Part 1: Die plates
GB/T 4678.11-2017 — Diecasting dies - Components - Part 11: Ejector pin
GB/T 4678.12-2018 — Die casting dies—Components—Part 12: Return pins
Secure payment via Stripe
Payments accepted
GB/T 4678.10-2017
$85.00