Partners save 15% on every standard

Valid

GB/T 46014-2025General technical requirements of solid wood composite lumber for furniture (English PDF)

家具用实木复合板通用技术条件

Open the GB/T 46014-2025 preview as PDF

Preview — first pages of GB/T 46014-2025 (full document: 15 pages)

This is a limited preview

Buy now to download the full PDF (15 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 1, 2025

Implementation date

February 1, 2026

Scope

GB/T 46014-2025 is the English-translated version of 家具用实木复合板通用技术条件.

GB/T 46014-2025 is the Chinese national standard covering the panel of solid wood layers bonded over a wood-based core, used for furniture carcases and tops — the categories it is divided into and the requirements for each, the moisture content tied to the annual average of the province the piece will live in, the formaldehyde and volatile organic compound emission classes, the test methods, the sampling and inspection rules, and the marking, packaging, transport and storage. First edition, with the furniture green supply chain standard GB/T 46013-2025. Under the China National Light Industry Council. In force from 1 February 2026. Issued on 1 August 2025, it has been in force since 1 February 2026.

Document preview — GB/T 46014-2025

National Standard of the People's Republic of China

ICS: 97.140
Classification: Y 81

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

PrefaceIII
1 Scope1
2 Normative references1
3 Terms and Definitions1
4 Categories3
5 Requirements3
6 Test methods7
7 Inspection Rules8
8 Marking, packaging, transportation and storage10
Appendix A (Informative) Classification of Solid Wood Composite Panels for Furniture12

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by the China Light Industry Federation.

This document is under the jurisdiction of the National Furniture Standardization Technical Committee (SAC/TC480).

This document was drafted by: Nanjing Forestry University, Shanghai Quality Supervision and Inspection Technology Research Institute, Zhejiang Yunfeng Moganshan Home Furnishing Co., Ltd.

Company, China Furniture Association, Beijing Jinyu Tiantan Furniture Co., Ltd., Shanghai Jianke Environmental Technology Co., Ltd., Mager Home Furnishing Co., Ltd.

Company, Zhejiang Tucson Custom Home Furnishing Co., Ltd., Fujian Zhangping Denuo Forestry Co., Ltd., Qiannianzhou New Materials Technology Group Co., Ltd.

Company, Shandong Datang Home Furnishing Co., Ltd.

The main drafters of this document are: Wu Zhihui, Feng Xinhao, Luo Jufen, Liu Yuanxiu, Tu Qi, Hu Bowen, Li Jingguang, Tang Bin, Wang Weiyang, Wu Qingshan, Tian Maohua and Tang Zengsheng.

General technical requirements for solid wood composite panels for furniture

1 Scope

This document defines the terms and definitions of solid wood composite panels for furniture, gives its classification, and specifies the requirements, Inspection rules and marking, packaging, transportation and storage requirements, and description of the corresponding test methods.

This document applies to the production, inspection and sales of solid wood composite panels for furniture, and solid wood composite panels for other purposes shall refer to it.

2 Normative references

GB/T 2828.1-2012

GB/T 9846-2015

GB/T 13010-2020

GB/T 17657-2022

GB/T 18259

GB 18580

GB/T 19367-2022

GB/T 20241-2021

GB/T 28202

GB/T 28999-2012

GB/T 29894

GB/T 39600-2021

GB/T 44690-2024

3 Terms and Definitions

The terms and definitions defined in GB/T 18259 and GB/T 28202 and the following apply to this document.

3.1 solidwoodsawntimber;solidwoodsawedtimber

Boards or timber of various specifications obtained by processing logs into lumber or sawing them longitudinally or transversely.

[Source. GB/T 28202-2020, 5.2, modified]

3.2 Solid wood splicing board

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 19367-2022 · GB/T 20241-2021

Editions of GB/T 46014

Edition	Title	Revision	Status
GB/T 46014-2025	General technical requirements of solid wood composite lumber for furniture	current edition	Current

This page sells the current edition, GB/T 46014-2025. Earlier editions are listed for reference only.

How to Buy GB/T 46014-2025

1Add to cart. Click the "Buy GB/T 46014-2025" button on this page. You can add more standards before checkout.
2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.