GB/T 45337-2025Tires intelligent manufacturing - Manufacturing execution system (MES) deployment - General specification (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part

1.Structure and drafting rules for standardization documents" Drafting. Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by the China Petroleum and Chemical Industry Federation. This document is under the jurisdiction of the National Rubber and Plastics Machinery Standardization Technical Committee (SAC/TC71). This document was drafted by: Soft Control Co., Ltd., Shandong Linglong Tire Co., Ltd., Qingdao University of Science and Technology, and Eagle Tire Group Ltd., Yiyang Rubber & Plastic Machinery Group Co., Ltd., Sailun Group Co., Ltd., Shandong Fengyuan Tire Manufacturing Co., Ltd., Prinx Chengshan (Shandong) Tire Co., Ltd., Qingdao Doublestar Tire Industry Co., Ltd., Tianjin Wanda Tire Group Co., Ltd., Guizhou Tire Co., Ltd., Dalian Rubber & Plastic Machinery Co., Ltd., Guilin Rubber Machinery Co., Ltd., Jiangsu Top Tire Co., Ltd., Wanxiang Xinyuan Technology Co., Ltd., Tianjin Saixiang Technology Co., Ltd., Guilin Rubber Design Institute Co., Ltd., Shandong Haohua Tire Co., Ltd. Co., Ltd., Taikaiying (Qingdao) Special Tire Technology Research and Development Co., Ltd., Shandong Yongsheng Rubber Group Co., Ltd., Qingdao Wangong Information Technology Co., Ltd. Co., Ltd., Beijing Rubber Industry Research and Design Institute Co., Ltd., Qingdao Soft Control Electromechanical Engineering Co., Ltd., Guangdong Yizumi Precision Injection Technology Co., Ltd. Co., Ltd., Weifang Shunfuchang Rubber and Plastic Co., Ltd., Weihai Jiahang Rubber Technology Co., Ltd., and Haian Rubber Group Co., Ltd. The main drafters of this document are. Guan Bingzheng, Yang Huili, Teng Maobin, Wang Chuansheng, Yang Hualin, Gao Jiangang, Peng Zhishen, Yang Yanping, Chen Jian, Cao Kai, Chen Xiaoyan, Yu Liyi, Han Hongchuan, Wang Jinxia, Che Haifeng, Liu Genchun, Peng Gang, Zhang Xiaochen, Su Peng, Sui Feifei, Shao Zhimin, Hao Yufeng, Sun Hongxi, He Cheng, Wang Gengxin, Wang Jianjun, Jiang Xiaojun, Zhao Qingle, Wang Xiaodong, Huang Zhenhua, Guo Hui, Yang Hong, Li Qing, Yu Zhenjiang, Chen Xingzhong, Liu Yuncheng, Li Cuixia, He Yan, Jiao Dongmei, Fang Deyun, Huang Yamata. Tire Intelligent Manufacturing General Specifications for Manufacturing Execution System (MES) Deployment

1 Scope

GB/T 45337-2025 is the Chinese general specification for deploying a manufacturing execution system in tyre production. Tyre making is an unusually hard MES case: it is a hybrid of continuous processes, mixing, extrusion and calendering, and discrete assembly and curing, the intermediate components have short and temperature-dependent shelf lives, and a single tyre carries a genealogy of a dozen semi-finished parts that must be traceable for the life of the product because of recall liability. The standard sets the deployment framework and then the requirements: the functional scope of the MES across the tyre process, the data model and the identification of materials, semi-finished components and finished tyres, the interfaces to the process control and to the enterprise systems, the traceability and genealogy requirements, the scheduling and dispatching, the quality management and the handling of non-conforming material, the equipment and energy monitoring, and the deployment process, testing, acceptance and the operation and maintenance of the system. It takes effect on 1 September 2025.

This document specifies the general principles, deployment architecture, management system, data storage service, interface service, Requirements for device sensing layer and basic network hardware. This document is applicable to the planning, deployment and implementation of MES for intelligent tire manufacturing.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document.

GB/T 25485 Industrial automation systems and integrated manufacturing execution system functional architecture

GB/T 36587 Rubber and Plastics Machinery Terminology

3 Terms and definitions

The terms and definitions defined in GB/T 25485 and GB/T 36587 apply to this document.

4 Abbreviations

The following abbreviations apply to this document. AGV. Automated Guided Vehicle APS. Advanced Planning and Scheduling System BOM. Bill of Materials BI. Business Intelligence ERP.Enterprise Resource Planning HR. Human Resources MES. Manufacturing Execution System MQTT. Message Queuing Telemetry Transport Protocol OA. Office Automation OEE.Overall Equipment Effectiveness OPC. Industrial standard protocol for process control (OLE for Process Control) PCS. Process Control System PDA. Personal Digital Assistant PLC. Programmable Logic Controller PLM. Product Lifecycle Management RGV. Rail Guided Vehicle