GB/T 44463-2024Technical requirements for internet data centres (IDC) (English PDF)
互联网数据中心(IDC)总体技术要求
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 44463-2024 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2024
Implementation date
April 1, 2025
Scope
GB/T 44463-2024 is the English-translated version of 互联网数据中心(IDC)总体技术要求.
GB/T 44463-2024 is the Chinese standard "Technical requirements for internet data centres (IDC)". Its scope clause reads: This document specifies the requirements for Internet data centers (IDCs) and their equipment in five aspects. basic requirements, high technology, high energy efficiency, high security, and high computing power.
Technical requirements of the surface. This document applies to the planning, design, construction, operation, maintenance and evaluation of Internet data centers (IDCs) and equipment.
Found what you need?
Document preview — GB/T 44463-2024
National Standard of the People's Republic of China
- ICS
- 35.020
- Classification
- L 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 3.1 Terms and Definitions
- 3.2 Abbreviations
- 4 General Requirements
- 5 Basic Requirements
- 5.1 Infrastructure
- 5.2 IT equipment
- 6 High Technology
- 6.1 Infrastructure
- 6.2 IT equipment
- 7 High energy efficiency
- 7.1 Infrastructure
- 7.2 IT equipment
- 8 High Security
- 8.1 Infrastructure
- 8.2 IT equipment
- 9 High computing power
- 9.1 Computing Devices
- 9.2 Storage Devices
- 9.3 Network Equipment
- 9.4 Safety equipment
- Appendix A (Normative) Key index requirements for Internet data center related equipment and components
1 Scope
This document specifies the requirements for Internet data centers (IDCs) and their equipment in five aspects. basic requirements, high technology, high energy efficiency, high security, and high computing power.
Technical requirements of the surface.
This document applies to the planning, design, construction, operation, maintenance and evaluation of Internet data centers (IDCs) and equipment.
2 Normative references
The contents of the following documents constitute essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB 3445-2018 Indoor fire hydrants
GB/T 3797-2016 Electrical control equipment
GB/T 4208-2017 Enclosure protection degree (IP code)
GB 4943.1-2022 Audio, video, information technology and communication technology equipment Part 1.Safety requirements
GB/T 7260.1-2023 Uninterruptible power supply system (UPS) Part 1.Safety requirements
GB/T 9254.1-2021 Electromagnetic compatibility of information technology equipment, multimedia equipment and receivers Part 1.Emission requirements
GB/T 10228-2023 Technical parameters and requirements for dry-type power transformers
GB 17625.1-2022 Electromagnetic compatibility limits Part 1.Harmonic current emission limits (equipment input current per phase <= 16A)
GB/T 18018-2019 Information security technology Router security technical requirements
GB/T 19413-2010 Unitary air conditioners for computer and data processing rooms
GB/T 19638.1-2014 Stationary valve-regulated lead-acid batteries Part 1.Technical requirements
GB/T 21050-2019 Information security technology Network switch security technical requirements
GB 25130-2010 Safety requirements for unitary air conditioners
GB 36660-2018 Low-pressure carbon dioxide gas inerting protection device
GB 50054-2011 Low voltage power distribution design specification
GB 50084-2017 Design specification for automatic sprinkler fire extinguishing systems
GB 50116-2013 Design specification for automatic fire alarm systems
GB 50166-2019 Construction and acceptance standards for automatic fire alarm systems
GB 50261-2017 Specification for the construction and acceptance of automatic sprinkler fire extinguishing systems
GB 50263-2007 Specification for construction and acceptance of gas fire extinguishing systems
GB 50370-2005 Design specification for gas fire extinguishing systems
GB 50877-2014 Specification for the construction and acceptance of fire-resistant rolling shutters, fire-resistant doors and fire-resistant windows
GB 50974-2014 Technical specification for fire water supply and fire hydrant systems
GB 51251-2017 Technical Standard for Smoke Control and Exhaust Systems in Buildings
GB 51410-2020 Technical standard for application of fire blocking in buildings
YD/T 502-2020 Low-voltage diesel generator sets for communication
YD/T 585-2010 Power distribution equipment for communication
YD/T 799-2010 Valve-regulated sealed lead-acid batteries for communication […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 3445-2018Indoor fire hydrant
- GB/T 3797-2016Electrical control assemblies
- GB/T 4208-2017Degrees of protection provided by enclosures (IP code)
- GB 4943.1-2022Audio/video,information and communication technology equipment—Part 1: Safety requirements
- GB/T 7260.1-2023Uninterruptible power systems (UPS)-Part 1: Safety requirements
- GB/T 9254.1-2021Information technology equipment, multimedia equipment and receivers - Electromagnetic compatibility - Part 1: Emission requirements
GB 51410-2020
How to Download GB/T 44463-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17625.1-2022 — Electromagnetic compatibility - Limits - Part 1: Limits for harmonic current emissions(equipment input current <=16 A per phase)
GB 25130-2010 — Safety requirements for unitary air-Conditioners
GB 3445-2018 — Indoor fire hydrant
Secure payment via Stripe
Payments accepted
GB/T 44463-2024
$1,160.00