GB/T 44420-2024Method for rapid determination of moisture content of bamboo and wood collection (English PDF)
馆藏竹木器文物含水率快速测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 44420-2024 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 23, 2024
Implementation date
December 1, 2024
Scope
GB/T 44420-2024 is the English-translated version of 馆藏竹木器文物含水率快速测定.
GB/T 44420-2024 is the Chinese national method for measuring quickly how much moisture is held by bamboo and wooden objects kept in museums and libraries. It works from the way the capacitance and the dielectric constant of bamboo and wood change with moisture content, which a meter converts into a percentage of the total dry mass.
It fixes the test conditions - a temperature of 15 °C to 35 °C, a relative humidity of 25% to 90% and an atmospheric pressure of 80 kPa to 106 kPa - and requires an instrument of accuracy class 2.0 or better under JJG 986-2004.
It then sets out the test steps, the data processing and the test report, with worked examples for a wooden square table in the appendices. It was issued on 23 August 2024 and has applied since 1 December 2024.
Found what you need?
Document preview — GB/T 44420-2024
National Standard of the People's Republic of China
- ICS
- 97.195
- Classification
- Y 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principles
- 5 Test conditions
- 6 Instruments and equipment
- 7 Test steps
- 7.1 Determine the object to be measured
- 7.2 Selecting a measuring instrument
- 7.3 Planning the detection points
- 7.4 Measurement data and records
- 8 Experimental data processing
- 9 Test report
- Appendix A (Informative) Example of planning of moisture content measurement points for bamboo and wooden artifacts in museums (taking a wooden square table as an example)
- A.1 Component number
- A.2 Planning the measurement points
- Appendix B (Informative) Sample form for rapid determination of moisture content of bamboo and wooden artifacts in museum collections
- Appendix C (Informative) Example of the report on the rapid determination of moisture content of bamboo and wooden artifacts in museums (taking a wooden square table as an example)
- C.1 Test subjects
- C.2 Standards used
- C.3 Test results
- C.4 Abnormalities observed
- C.5 Test date
- References
2 Normative references
JJG 986-2004 Wood moisture content measuring instrument
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Bamboo and wood collection
A general term for bamboo and wooden cultural relics and bamboo and wooden components of other cultural relics collected by museums, libraries and other collection institutions.
3.2 Moisture content
The percentage of water content to total dry mass of bamboo and wooden artifacts (3.1) in the collection.
4 Principle
The change of moisture content of bamboo and wood materials will cause the change of their capacitance and dielectric constant. By measuring the capacitance and dielectric constant, determine its moisture content.
5 Test conditions
The rapid determination of moisture content should meet the following conditions.
a) Temperature: 15 °C~35 °C;
b) Relative humidity: 25% to 90%;
c) Atmospheric pressure: 80 kPa~106 kPa.
6 Instruments and Equipment
The instrument for rapid determination of moisture content of bamboo and wooden artifacts in museum collections should meet the following requirements.
a) The accuracy level shall not be lower than level 2.0 specified in 3.1 of JJG 986-2004;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
How to Download GB/T 44420-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJG 986-2004 — Verification Regulation of Wood Moisture Content Measuring Meters
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 44420-2024
$210.00