GB/T 4436-2012Tolerances on form and dimensions of wrought aluminium and aluminium alloy tubes (English PDF)
铝及铝合金管材外形尺寸及允许偏差
This is a limited preview
Buy now to download the full PDF (26 pages)
Need quotation for your management?
Get a formal quotation for GB/T 4436-2012 in 30 minutes.
Issued by
State Administration for Market Regulation, Standardization Administration of China
Level / Type
National · Recommended
Issue date
May 25, 2026
Implementation date
December 1, 2026
Scope
GB/T 4436-2012 is the English-translated version of 铝及铝合金管材外形尺寸及允许偏差.
GB/T 4436-2012 is the Chinese standard "Tolerances on form and dimensions of wrought aluminium and aluminium alloy tubes". It was issued by State Administration for Market Regulation, Standardization Administration of China. Issued on 2026-05-25, in force from 2026-12-01.
Found what you need?
Document preview — GB/T 4436-2012
National Standard of the People's Republic of China
- ICS
- 77.150.10
- Classification
- H61
Issued by: State Administration for Market Regulation, Standardization Administration of China
Contents
- [Preview only]
- 1 Scope
- 1.2 Principle
- 1.3 Reagents
- 2 Normative references
- 3.1 General Provisions
- 3.2 Nuclear Safety Criterion
- 4 Designation expression
- 4.1 General
- 4.2 Removal of surface defects
- 4.3 Traffic and Transportation
- 4.4 Working Area
- 5 Calculation of Analysis Results
- 5.2 Main Production Facilities Layout
- 5.3 Auxiliary Facilities Layout
- 5.4 Administration Buildings Area Layout
- 5.5 Outside Construction Layout
- 5.6 Physical Protect System and Entrance Layout
- 6 Precision
- 6.2 Determination of Design Elevation
- 6.3 Step Type Design
- 6.4 Earth (Stone) Work
- 6.5 Water Drainage of Site
- 7 Assessment of results
- 7.2 Underground Pipeline
- 7.3 Overhead Pipeline
- 8 Test report
- 8.2 Transfer Station (Transshipment Wharf)
- 8.3 Railway
- 8.4 Road
- 8.5 Water Transport
- 9.2 Vegetation Arrangement
- 9.3 Tree Species Selection
1 Foreword
GB/T 4436-2012 was issued by State Administration for Market Regulation, Standardization Administration of China on 25 May 2026 and has been in force since 1 December 2026.
It replaces the earlier edition GB/T 4436-1995.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 4436-2012 falls under ICS 77.150.10, in the field of metallurgy.
This catalogue holds 3,436 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Sector: National Standard (Recommended)
Issued by: State Administration for Market Regulation, Standardization Administration of China
English translation: about 26 pages (approximate)
Chinese original: about 38,365 characters
4 Related standards
Other editions:
GB/T 4436-2026 (later edition)
GB/T 4436-1995 (earlier edition)
Standards on related subjects:
GB/T 3880.3-2024 — Wrought aluminium and aluminium alloy plates, sheets and strips for general engineering - Part 3: Dimensional tolerances
GB/T 4437.1-2023 — Aluminium and aluminium alloys extruded tubes—Part 1: Seamless tubes
GB/T 4437.2-2017 — Aluminium and aluminium alloy extruded tubes—Part 2: Seam tubes
5 Classification and status
International classification (ICS): 77.150.10
Chinese Standard Classification (CCS): H 61
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 28713-2023Enhanced heat transfer tubes used in heat exchanger
- GB/T 4437.1-2023Aluminium and aluminium alloys extruded tubes—Part 1: Seamless tubes
- GB/T 41494-2022Aluminum alloy lining plastics pipes and fittings
- GB/T 6893-2022Aluminium and aluminium alloys cold drawn (rolled) tubes
- GB/T 24590-2021Enhanced tubes for efficient heat exchanger
- GB/T 38512-2020Aluminum and aluminum alloy tubes for the pressure vessel
How to Download GB/T 4436-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 4436-2012
$465.00