GB/T 43812-2024Technical guidelines for material balance management in food production (English PDF)
食品生产物料平衡管理技术指南
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 43812-2024 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 15, 2024
Implementation date
March 15, 2024
Scope
GB/T 43812-2024 is the English-translated version of 食品生产物料平衡管理技术指南.
GB/T 43812-2024 is the Chinese national guideline for running a material balance check in food production, so that what goes into a process can be reconciled with what comes out.
It defines material, material balance, material balance rate, yield and material balance limit, then sets the basic principles and the four balance factors - actual product output, amounts of consumption, sampling volume during the process and theoretical output - before the management clause on systems, plans, implementation and inspection.
Appendix A gives the calculation of the balance rate, the method for setting balance limits and the yield calculation. It asks for balance inspections at least once a year and lists common causes of a rate outside the limit, from instrument deviation to mixed batches. It was issued on 15 March 2024 and has applied since the same date.
Found what you need?
Document preview — GB/T 43812-2024
National Standard of the People's Republic of China
- ICS
- 67.04
- Classification
- X 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword3
- 1 Scope4
- 2 Normative References4
- 3 Terms and Definitions4
- 4 Basic Principle5
- 5 Material Balance Factors5
- 5.1 Actual product output5
- 5.2 Amounts of consumption6
- 5.3 Sampling volume during process6
- 5.4 Theoretical output6
- 6 Material Balance Management6
- 6.1 Management system6
- 6.2 Management plan and control6
- 6.3 Implementation7
- 6.4 Inspection and improvement8
- Appendix A (Informative) Calculation Method of Material Balance9
- A.1 Calculation of material balance rate9
- A.2 Method for determining material balance limits9
- A.3 Calculation of yield10
1 Scope
This Document provides the basic principles of material balance management, factors of material balance, and guidance for material balance management in food production.
This Document is applicable to material balance management in food production.
2 Normative References
There are no normative references in this Document.
3 Terms and Definitions
For the purposes of this Document, the following terms and definitions apply.
3.1 Material in food production
Various substances and materials that are put into and circulated during the food production process.
NOTE: Including raw and auxiliary materials of food, food packaging materials, as well as semi-finished products, reusable defective products, waste products and finished products produced during food processing and storage.
3.2 Material balance
The state in which the mass conservation is achieved between the material input and output.
NOTE: Input includes the amounts of raw and auxiliary materials; output includes the actual output of the product, the amounts of by-products, the amounts of consumption and the amounts of process sampling. When the production is not fully completed, the output also includes the amounts of products under production, which includes the sum of the online products on the production line.
3.3 Material balance rate
The ratio of the sum of actual product output (including estimated output of product under production), the amounts of consumption and the amounts of process sampling to the theoretical output.
3.4 Yield
The ratio of the actual qualified output of a product to its theoretical output.
3.5 Material balance limit
The acceptable range of material balance rate under normal production conditions.
4 Basic Principle
4.1 Food production enterprises should implement food production material balance management and establish a scientific material input and output mass balance relationship. By calculating the material balance rate and considering the material balance limit, the adverse effects on food quality caused by the introduction of undue substances and deviations, errors and other abnormalities in the process, feeding, operation and other aspects of food production shall be prevented. According to the yield, material balance management measures shall be optimized to improve the production efficiency of the enterprise.
4.2 Food production material balance management should carry out various activities in accordance with the basic principles of mass management.
4.3 Food production material balance management should be based on objective information and real and effective data; comprehensively consider raw materials in different states such as solid, liquid, semi-solid, and different processes such as physical, chemical, and biological methods; and build a management model that meets the food production process requirements and material balance limits.
4.4 Food production enterprises should calculate the material balance rate when new products are developed, put into production, or when processes, raw materials, and equipment change; and carry out corresponding material balance management according to production management needs.
5 Material Balance Factors
5.1 Actual product output
The actual product output refers to the actual output of all finished products, including qualified finished products, unqualified finished products, finished product sampling and testing, and retained samples. If the material balance rate needs to be calculated during the production process, the estimated output of semi-finished products and other products under production shall also be included in the actual product output. The output of products can be estimated based on the completion rate or experience rate of the same batch of finished products. material balance management plan should include the selection of material balance management objects and range, the determination of material balance calculation methods, etc.
6 Material Balance Management
6.2 Management plan and control
6.2.2 The objects of material balance management should include raw and auxiliary materials of food, packaging materials, finished products, etc. The objects of material balance management can be a single material or all materials.
6.2.3 Food production enterprises should determine the range of the material balance management process based on the feeding method, raw material turnover or loss status, process parameters and requirements, daily production and product verification status, etc.
6.2.4 Food production enterprises should determine the appropriate material balance calculation method. Under the premise of compliance, the material balance rate should be calculated according to the characteristics of raw and auxiliary materials, production process, operation method and production cycle, etc., as well as according to the production batch or the set feeding amount. The calculation method of material balance rate is shown in A.1 of Appendix A.
6.2.5 Material balance management can be carried out in stages according to the food production process, or it can cover the entire production process. For simple processes such as solid and liquid and physical methods, all raw materials should be included in one time for accounting and management; for complex production methods such as chemical methods, biological methods, multiple feedings, solid-liquid conversion, etc., accounting and management can be carried out in stages according to the process and feeding method.
6.2.6 Food production enterprises should scientifically and reasonably determine the material balance limit. See A.2 for the method of determining the material balance limit.
6.2.7 Food production enterprises can quickly calculate the material balance rate or evaluate production efficiency based on the yield. See A.3 for the yield calculation method.
6.3 Implementation
6.3.1 Food production enterprises should compare the actual material balance calculation results with the set material balance limits to ensure that the material balance rate meets the material balance limits.
6.3.2 When the material balance rate does not meet the material balance limit, food production enterprises should analyze the causes based on the actual situation. Common problems are as follows.
--- Irrational setting of material balance limits;
--- Insufficient research on fixed consumption data;
--- Deviation in measuring instruments;
--- Differences in net weight or content of incoming materials;
--- Irrational setting of production process parameters or operational errors;
--- Mixed products from different batches;
--- Intentional or mis-operation to introduce other materials;
--- Incomplete collection of the amounts of consumption.
6.3.3 Based on the found problems and the analyzed causes, food production enterprises should take corrective measures for the production process.
6.3.4 Food production enterprises should implement material balance management in combination with procurement, production, logistics or traceability management systems to achieve data intercommunication and sharing, and ensure that the quantity of terminal products corresponds to the batch and processing of raw and auxiliary materials.
6.3.5 Food production enterprises should establish material balance management records, including production plans, raw and auxiliary material input, packaging material input, the amounts of consumption, semi-finished product quantity, process sampling and testing quantity and retained sample quantity, qualified finished product quantity, unqualified finished product quantity, finished product sampling and testing quantity and retained sample quantity, as well as deviations from material balance limits, deviation causes, corrective measures and other records.
6.4 Inspection and improvement
6.4.1 Food production enterprises should conduct material balance inspections regularly to confirm whether material balance management is effectively implemented and compliant.
6.4.2 Food production enterprises should determine the purpose, content, method, frequency and person in charge of material balance inspections.
6.4.3 Food production enterprises should implement material balance inspections at the prescribed frequency, which should be no less than once a year.
6.4.4 Food production enterprises should evaluate the results of the material balance inspection and put forward the evaluation conclusions.
6.4.5 When problems are found in the material balance inspection, food production enterprises should formulate corrective and improvement measures.
6.4.6 Food production enterprises should record and preserve the inspection, evaluation and improvement records of material balance management. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 43812-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 43812-2024
$195.00