GB/T 42948-2023Protective polyethylene gloves for daily use (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document specifies the classification, requirements, inspection rules, marking, packaging, transportation and Storage, its test methods are described.

This document is applicable to protective handpieces made of polyethylene film produced by the blow molding or casting method as the main raw material and made by the pressing and heat sealing process. The production, inspection and sales of sets.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

GB/T 1040.1-2018 Determination of tensile properties of plastics Part 1: General principles

GB/T 1040.3-2006 Determination of tensile properties of plastics Part 3: Test conditions for films and sheets

GB/T 2828.1-2012 Enumeration sampling inspection procedures Part 1: Batch-by-batch inspection sampling retrieved by acceptance quality limit (AQL) plan

GB/T 2918-2018 Standard environment for conditioning and testing of plastic specimens

GB/T 3920-2008 Color fastness test of textiles Color fastness to rubbing

GB/T 9345.1-2008 Determination of ash content of plastics Part 1: General method

GB/T 16276-1996 Plastic film adhesion test method

QB/T 5787-2022 Test method for rub resistance of plastic films

3 Terms and definitions

There are no terms or definitions to be defined in this document.

4 Categories

4.1 Gloves are divided into high-density polyethylene (PE-HD) gloves and low-density polyethylene (PE-LD) gloves according to their main materials.

4.2 Gloves are divided into smooth type and embossed type according to whether they are embossed.

4.3 Gloves are divided into ordinary type and anti-leakage type according to whether they have anti-leakage function.

5 Technical requirements