Valid

GB/T 42898-2023Determination of the emission of semivolatile organic compounds (SVOC) for building products (English PDF)

建材产品中半挥发性有机化合物(SVOC)释放量的测试

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42898-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 6, 2023

Implementation date

March 1, 2024

Scope

GB/T 42898-2023 is the English-translated version of 建材产品中半挥发性有机化合物(SVOC)释放量的测试.

This document describes the methods for determining the emission of semi-volatile organic compounds from building products, namely the environmental test chamber method and the micro-chamber method.

The document applies to the testing of SVOC emission from wood-based panels and their products, coatings, adhesives, thermal insulation materials and products, flooring materials, wallpapers and wall coverings, sports surface materials and other building products.

Found what you need?

Document preview — GB/T 42898-2023

National Standard of the People's Republic of China

ICS
91.100.01
Classification
Q 10

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative reference documents
  • 3 Terms and Definitions
  • 4 Principle
  • 5 Environmental test chamber method
  • 6 Micro-cabin method
  • 7 test report
  • Appendix A (Normative) Sample Storage, Selection and Sample Preparation Methods
  • Appendix B (Normative) Bearing ratio and coating amount of typical building materials products
  • Appendix C (informative) Microcabinet system and recovery rate evaluation method
  • Reference

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document describes the testing methods for the release of semi-volatile organic compounds (SVOC) in building materials products, including the environmental test chamber method and Micro-cabin method.

This document applies to artificial boards and their products, coatings, adhesives, thermal insulation materials and products, flooring materials, wallpaper/wall coverings, and sports ground materials.

Testing of the release of semi-volatile organic compounds from building materials and other building materials products.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

JJF (Building Materials) 182-2021 Calibration Specifications for Environmental Test Chambers for Volatile Testing of Building Materials Products

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Semi-volatile organic compound; SVOC

Use TenaxTA or equivalent packed adsorption tube sampling, non-polar chromatographic column (polarity index less than 10) for analysis, the retention time is Organic compounds between n-hexadecane (exclusive) and n-docosane (inclusive).

3.2 Total semi-volatile organic compounds; TSVOC

Use TenaxTA or equivalent packed adsorption tube sampling, non-polar chromatographic column (polarity index less than 10) for analysis, the retention time is The sum of organic compounds between n-hexadecane (exclusive) and n-docosane (inclusive).

3.3 SVOC emission rate

The mass of semi-volatile organic compounds released from the surface of the sample per unit area and unit time.

3.4 Gas exchange rate air change rate

The ratio of the volume of clean gas entering the cabin per unit time to the effective volume of the cabin.

3.5 Gas flow air flowrate

The volume of gas entering the cabin per unit time.

3.6 Recovery rate recovery

The ratio of the amount of targets in the air collected from the cabin to the amount of targets entering the cabin is tested within a certain period of time.

3.7 Loading factor

The ratio of the exposed surface area of the test piece to the effective volume of the test chamber.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/T 42898-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 42898-2023

$300.00