Valid

GB/T 42832.1-2023Interface specification for signal in space of BeiDou Satellite-based Augmentation System—Part 1: Single frequency service signal BDSBAS-B1C (English PDF)

北斗星基增强系统空间信号接口规范 第1部分:单频增强服务信号BDSBAS-B1C

Preview PDF

This is a limited preview

Buy now to download the full PDF (40 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42832.1-2023 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

August 6, 2023

Implementation date

March 1, 2024

Scope

GB/T 42832.1-2023 is the English-translated version of 北斗星基增强系统空间信号接口规范 第1部分:单频增强服务信号BDSBAS-B1C.

This document specifies the interface of the single frequency service signal BDSBAS-B1C of the BeiDou Satellite-based Augmentation System: the radio frequency characteristics of the signal and the structure of its message.

The document applies to receiver development, to the testing of indicators, to the evaluation of service performance and to the other related work carried out with the BDSBAS-B1C signal.

It is the first part of the standard on the interface of the signal in space of the BeiDou Satellite-based Augmentation System.

Found what you need?

Document preview — GB/T 42832.1-2023

National Standard of the People's Republic of China

ICS
33.070.40
Classification
V 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative reference documents
  • 3 Terms, definitions and abbreviations
  • 3.1 Terms and definitions
  • 3.2 Abbreviations
  • 4 Constellations and space-time benchmarks
  • 4.1 Space Constellation
  • 4.2 Coordinate system
  • 4.3 Time system
  • 5 Signal RF Characteristics
  • 5.1 Carrier frequency
  • 5.2 Signal spurious
  • 5.3 Modulation method
  • 5.4 Carrier phase noise
  • 5.5 Signal Spectrum
  • 5.6 Doppler shift
  • 5.7 Carrier frequency stability
  • 5.8 Polarization mode
  • 5.9 Code/carrier frequency consistency
  • 5.10 Signal landing power
  • 5.11 Modulation loss
  • 5.12 Maximum code phase deviation
  • 5.13 Signal encoding
  • 6 Enhanced message
  • 6.1 Message description
  • 6.2 Message arrangement
  • 6.3 Message validity period
  • Appendix A (informative) BDSBAS-B1C encoder implementation
  • Appendix B (Normative) Message Definition
  • Appendix C (normative) How to use messages
  • Reference

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document is Part 1 of GB/T 42832 "Beidou Satellite-based Augmentation System Space Signal Interface Specification". GB/T 42832 has been issued The following parts have been published.

---Part 1: Single-frequency enhanced service signal BDSBAS-B1C.

Introduction

The Beidou Satellite-Based Augmentation System (BDSBAS) is an important part of the Beidou system, through BDSBAS-B1C and BDSBAS- B2a enhances the signal and provides users in China and surrounding areas with single-frequency enhanced services and dual-frequency services that comply with the requirements of the International Civil Aviation Organization (ICAO) standards. Multi-constellation enhanced services.

This document defines the relevant content of the Beidou Satellite-based Augmentation System single-frequency augmentation service signal BDSBAS-B1C. It is a reference for Chinese satellite navigation Technical document "Beidou Satellite Navigation System Space Signal Interface Control Document Satellite-based Enhanced Service Signal" issued by the System Management Office Standard conversion carried out by BDSBAS-B1C (version 1.0).

The Beidou satellite-based augmentation system space signal interface specification is planned to consist of two parts.

---Part 1: Single frequency enhanced service signal BDSBAS-B1C;

---Part 2: Dual-band enhanced service signal BDSBAS-B2a.

1 Scope

This document specifies the signal radio frequency characteristics, electrical Text structure, etc.

This document is applicable to receiver development, indicator testing, service performance evaluation and other related work using BDSBAS-B1C signals.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the latest version (including all amendments) applies to this document. document.

GB/T 39267-2020 Beidou Satellite Navigation Terminology

3 Terms, definitions and abbreviations

3.1 Terms and definitions

The terms and definitions defined in GB/T 39267-2020 and the following apply to this document.

3.1.1 GEO satellite

Navigation satellites operating in geostationary orbit (GEO).

Note: GEO is a prograde orbit in which the inclination and eccentricity of the satellite orbit are zero, and the operating period is the same as the earth's rotation period (about 24 hours). [Source: GB/T 39267-2020,3.2.4]

3.1.2 GPS time GPStime; GPST

The time base established and maintained by GPS uses SI seconds for continuous time without leap seconds. The starting epoch of GPST is UTC At 00.00.00 on January 6, 1980, traced to UTC (USNO).

Note: GPST uses week counts and seconds within the week. [Source: GB/T 39267-2020,2.2.17]

3.1.3 WGS-84 Geodetic Coordinate

The geodetic coordinate system used by GPS. The origin of its coordinate system is located at the center of mass of the earth, and the Z-axis points to the (International Time Bureau) BIH1984.0

The defined direction of the Protocol Earth Pole (CTP), the X-axis points to the intersection of the zero-degree meridian of BIH1984.0 and the CTP equator, and the Y-axis satisfies the right-hand law. [Source: GB/T 39267-2020,2.2.7]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 40 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 42832.1-2023

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
40 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 42832.1-2023

$575.00