GB/T 42802-2023Juvenile products - General requirements for bath washing supplies (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document was proposed and managed by the National Working Group on Standardization of Baby and Child Products (SAC/SWG18): This document is drafted by: Guangzhou Customs Technology Center, Shenzhen Academy of Inspection and Quarantine, Shenzhen University of Technology, Goodbaby Children's Products Co:, Ltd:, Guangzhou Inspection and Certification Group Co:, Ltd:, Standard Technical Service (Shanghai) Co:, Ltd:, Aofei Entertainment Co:, Ltd: Company, Hangzhou Baike Industrial Co:, Ltd:, Guangdong Lemeida Group Co:, Ltd:, Jiayingbao Co:, Ltd:, Mattel Toys Technology Consulting (Shenzhen Shenzhen) Co:, Ltd:, Beijing China Light Union Certification Center Co:, Ltd:, Guangdong Consumer Council, Shenzhen Consumer Council, Shanghai Quality Supervision and Inspection Technology Research Institute, Nanjing Customs Light Industry Products and Children's Products Testing Center, Shanghai Customs Mechanical and Electrical Products Testing Technology Center, Amazon Xun (China) Investment Co:, Ltd:, Shenzhen Institute of Metrology and Quality Inspection, Yike Testing and Certification Co:, Ltd:, Guangdong Jiexin Inspection and Certification Co:, Ltd: company: The main drafters of this document: Yi Lezhou, Lin Zhe, Qiu Huiling, Zhang Xiaoning, Zheng Dayong, Cao Taiquan, Lu Benxuan, Dai Jie, Wu Shanshan, Xu Xiaoguang, Liang Jianxun, Xu Ying, Zhang Jing, Zhu Guang, Hu Honglin, Zhou Jue, Liu Jin, Xia Yi, Song Zijun, He Yunfeng, Yang Yaohui, Liu Ping, Ni Binbin, Lu Jianwei, Mo Youwen, Wang Bin: General technical requirements for baby and children's products and bathing utensils

1 Scope

GB/T 42802-2023 sets the general technical requirements for infant and child bathing products - baby baths, bath seats, supports and the accessories sold with them. The hazard that dominates is drowning: a bath seat gives a parent the impression that the child is secure and can therefore be left for a moment, and a child can drown in the time it takes to answer a door. Behind that come the ordinary ones - suction cups that release, entrapment gaps, and the chemicals in a warm wet plastic article that a small child will put in their mouth. The standard sets the general requirements on appearance and hygiene, the technical requirements on chemical substance content and on mechanical and physical properties, the corresponding test methods, and the marking, packaging, transport and storage provisions, including the permanent safety warning the product must carry. It took effect on 1 June 2024.

This document stipulates the product technical requirements, test methods, labels, packaging, transportation and storage of bathing utensils in baby and children's products: This document applies to bathtubs (including inflatable bathtubs, folding Bathtubs, bath tubs, bath seats, bath lounge chairs, bath mats, brackets, suction cups, armrests and other products: This document does not apply to bathing utensils and accessories designed for infants and children with special needs in hospitals, rehabilitation institutions, etc: Other parts or products designed to support the baby during the baby's bath, such as: basins, soap holders, towel rails, water pumps, shower handles, toys, etc:

Note: See Appendix A for the relevant technical requirements for bathing appliances for baby and child products:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references Only the version corresponding to the date applies to this document; for undated reference documents, the latest version (including all amendments) applies to this document document:

GB 6675:2-2014 Toy Safety Part 2: Mechanical and Physical Properties GB 6675:

3 Terms and Definitions

The following terms and definitions defined in GB 6675:2-2014 apply to this document: 3:

1 Bathwarebathwashingsupplies Bathtubs, tubs or other similar products for bathing infants and children under 6 years old:

Note: Including auxiliary parts that provide support for infants and children when nurses bathe them, such as bath seats, bath recliners, bath mats, brackets, suction cups, armrests, etc: 3:2 bathtub bathtub It can hold water by itself and is specially designed for bathing babies and children: It can be used as a stand-alone product or a product combined with a stand: NOTE: It can be a bathtub, it can be foldable, or it can include integral parts that can be folded or adjusted (such as foldable feet): 3:3 stand Static structure not integrated into the bathtub, designed to accommodate, support and elevate the bathtub (3:2):

Note: The stand can be freestanding or designed to be mounted on an adult bathtub: 3:4 bath seat bathseat Bathing appliances (3:1) designed to keep infants and children in a seated position during bathing:

4 Toy Safety Part 4: Migration of Specific Elements

GB/T 17592 Determination of banned azo dyes in textiles

GB/T 22048 Determination of Specific Phthalate Plasticizers in Toys and Children's Products

GB/T 23344 Determination of 4-aminoazobenzene in textiles

GB/T 40182 Guidelines for judging plasticized materials in toys and products that can be placed in the mouth

GB/T 41524 Determination of short-chain chlorinated paraffins in toy materials by gas chromatography-mass spectrometry SN/T 2407 Determination of Phenol and Bisphenol A in Toys