GB 6675.11-2014Safety of toys - Part 11: Swings, slides and similar activity toys for indoor and outdoor family domestic use (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents".

Drafting.

The various parts of GB (GB/T) 6675 "Toy Safety" and GB/T 19865 "Safety of Electric Toys" together constitute the supporting toy safety standards.

system.

This document is Part 11 of GB (GB/T) 6675 "Toy Safety". GB (GB/T) 6675 has already published the following parts.

---Part 1.Basic Specifications;

---Part 2.Mechanical and Physical Properties;

---Part 3.Flammability;

---Part 4.Migration of Specific Elements;

---Part 9.Experimental toys for chemical and similar activities;

---Part 10.Smell Board Toys, Makeup Kit Toys, and Taste Toys;

---Part 11.Household swings, slides and similar indoor and outdoor play toys;

---Part 13.Chemical Toy Sets (excluding laboratory toys);

---Part 14.Requirements and testing methods for finger paints.

This document replaces GB 6675.11-2014 "Toy Safety Part 11.Household Swings, Slides and Similar Indoor and Outdoor Activities"

Compared with GB 6675.11-2014, the main technical changes in "Toys" are as follows, apart from structural adjustments and editorial modifications.

---The scope has been expanded to include "inflatable activity toys" and swimming pools deeper than 400mm have been excluded (see Chapter 1,.2014 edition).

Chapter 1);

---Changes have been made to "Active Toys" (see 3.1,.2014 edition 3.1), "Fence" (see 3.4,.2014 edition 3.4), and "Swing" (see

3.22 (see 3.17 of the.2014 edition) and the definition of "swings for toddlers" (see 3.23, 3.10 of the.2014 edition);

---Added "sloping surface" (see 3.6), "hand gripping component" (see 3.12), "hand holding component" (see 3.13), and "inflatable activity toy" (see 3.14).

3.16) Terms and definitions for "wading pool" (see 3.17) and "elastic properties" (see 3.19);

---Added "Materials" (see 4.1.1), "Hardware" (see 4.1.2), "Diameter of Ropes and Other Suspension Devices" (see 4.1.7), and "Extrusion"

"Points and shear points" (see 4.1.9), "Hand support. gripping and grasping components" (see 4.1.10), "Handrails and hand supports" (see 4.1.9).

4.3.2) Requirements for "Inflatable Play Toys" (see 4.10) and "Wait Pools" (see 4.11);

---Changes have been made to "fence" (see 4.2,.2014 version 4.2), "head and neck clamp" (see 4.4.1,.2014 version 4.4.1), and "slippery".

"Ladders" (see 4.6,.2014 edition), "Swings and other movable toys with crossbeams" (see 4.7,.2014 edition).

The requirements of the "seesaw" clause (see 4.8,.2014 edition);

---"Static strength" (see 4.1.3, 4.1.1 of the.2014 edition), "Fence" (see 4.2, 4.2 of the.2014 edition), "Beams, Swinging devices"

"Strength of suspension connectors and suspension couplers" (see 4.7.3, 4.7.2 of the.2014 edition), "Carousels and rocking toys" (see...)

Version 4.9 (2014 version 4.9) added content requiring compliance with the relevant requirements of GB 6675.2 after testing;

---Added requirements for the labeling of "wading pools" (see 5.2.3), "operating instructions" (see 5.3), and "warnings" (see 5.5);

---A "General Rule" (see 6.1) has been added to determine the number of users of active toys;

---Added "Stability of seesaws" (see 6.2.6), "Deflation test of inflatable toys" (see 6.10), and "Stability of non-inflatable wall wading pools"

Static load test (see 6.11), diameter of ropes and other suspension devices (see 6.12), measurement of the sliding section and exit section of the slide.

Test methods such as "quantity" (see 6.13);

---Changes have been made to "Stableness of the Slide" (see 6.2.3, 6.1.3 in the.2014 version) and "Determination of Impact of the Swinging Element" (see 6.5,.2014 version).

Test methods include 6.4 in the.2014 edition, the "lasso nail test" (see 6.7, 6.6 in the.2014 edition), etc.

---Implementation requirements for the standard have been added (see Chapter 7);

---Appendix A, "Principles," has been changed from normative to informative, and the chapter numbers have been changed to natural order (see Appendix A,.2014 edition).

A);

---The following have been removed. "Climbing and swing ropes, chains, and cables" (see A.4.1.5,.2014 edition) and "Suspension connectors and suspension devices".

(See A.4.7.8 in the.2014 edition) The content has been expanded to include "wading pool" (see A.3) and "minimum distance between the oscillating element and the ground".

(See A.13) and the contents of "Inflatable Toys" (see A.15);

---Added "Guidelines for Safety Labeling of Certain Types of Activity Toys" (see Appendix C).

This document is modified to adopt ISO 8124-4.2025 "Toy safety - Part 4.Household activity toys".

The technical differences between this document and ISO 8124-4.2025, and the reasons therefor, are as follows.

---The normative reference to ISO 7010.2019 has been removed to adapt to my country's technical conditions and increase operability;

---ISO 8124-1.2022 has been replaced by the normatively referenced GB 6675.2 (see Chapter 3, 4.1.2, 4.1.3, 4.1.8, 4.2, 4.7.3).

4.9, 4.11.2, 6.3.2.4, 6.3.3.3.1, 6.3.3.3.2, 6.4.3, 6.5.4.2), to adapt to my country's technological conditions and increase operability.

Actual nature;

---ISO 868 (see 4.1.9) has been replaced with the normatively referenced GB/T 2411 to adapt to my country's technical conditions and increase operability.

Actual nature;

---In accordance with the "Product Quality Law of the People's Republic of China", the product name, product standard number, safety warning, and safety information have been added to the "labeling".

Labelling requirements throughout the entire product lifecycle (see 5.1) are required to ensure product labelling complies with legal requirements;

---The phrase "wading pools that can be inflated to a depth of 300mm or more should have their packaging, assembly, and installation instructions included" has been removed from the definition of "wading pools."

The product includes a statement. "This product may be subject to the Swimming Pool Fence Law; please consult your local authorities." This is to comply with our country's laws and regulations.

Regulatory requirements;

---Appendix C, "Guidelines for Safety Labeling of Certain Types of Activity Toys," is changed to a normative appendix (see Appendix C) to implement "Warning 5.5."

The requirements in the document.

The following editorial changes have been made to this document.

---To align with existing standards, the standard name has been changed to "Toy Safety Part 11.Indoor Swings, Slides and Similar Purposes for Domestic Use".

Outdoor activity toys.

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the China National Light Industry Council.

This document is under the jurisdiction of the National Toy Standardization Technical Committee (SAC/TC253).

Introduction

The various parts of GB (GB/T) 6675 "Toy Safety" and GB/T 19865 "Safety of Electric Toys" together constitute the toy safety standard system.

Toys that meet these document requirements will reduce the proportion of toys used in their intended manner (normal use) and used in unintended manner (foreseeable).

Potential dangers arising from reasonable misuse.

GB (GB/T) 6675 "Toy Safety" is divided into basic specifications, general requirements, and specific requirements, and is proposed to consist of the following parts.

---Part 1.Basic Standards. The purpose is to standardize the basic safety requirements for toy products.

---Part 2.Mechanical and Physical Properties. The purpose is to standardize the general requirements for the mechanical and physical properties of toy products.

---Part 3.Flammability. The purpose is to standardize the general requirements for the flammability of toy products.

---Part 4.Migration of Specific Elements. The purpose is to standardize general requirements for migratable elements in toy products.

---Part 9.Experimental toys for chemical and similar activities. The purpose is to regulate specific requirements for this type of toy product.

---Part 10.Olfactory play toys, cosmetic sets, and gustatory play toys. The aim is to regulate these types of toy products.

Specific requirements.

---Part 11.Household swings, slides and similar indoor and outdoor play toys. The purpose is to regulate the characteristics of these toys.

Requirements are set.

---Part 13.Chemical Toy Sets (excluding laboratory toys). The purpose is to regulate specific requirements for this type of toy product.

---Part 14.Requirements and Test Methods for Finger Paints. The purpose is to standardize specific requirements for this type of toy product.

This document specifies the requirements for household swings, slides, and similar indoor and outdoor play toys, and is consistent with GB 6675.1 and GB 6675.2.

GB 6675.3, GB 6675.4, and GB/T 19865 should be used in combination.

This document does not and does not intend to absolve parents of their responsibilities, including the responsibility to choose appropriate toys and to ensure that children of different ages are comfortable using the same toy.

Regulatory responsibilities, etc.

Toy Safety Part 11.Household Swings, Slides and...

Similar indoor and outdoor activity toys

1 Scope

This document specifies the requirements and testing for household indoor and outdoor play toys intended for children under 14 years of age to play on or inside.

method.

This document applies to swings, slides, seesaws, carousels, rocking toys, and climbing structures that are typically designed to support the weight of one or more children.

Swings, toddler swing seats, and other similar activity toys.

This document does not apply to the following products.

a) Fitness and exercise equipment, unless it is connected to active toys;

b) Reservations for equipment used in schools, daycare centers, kindergartens, public playgrounds, restaurants, shopping centers, and similar public places;

c) Baby care products, such as (but not limited to) baby swings, playpens/fences, beds, or furniture including picnic tables, cradles, and special baby care products.

Products designed for therapeutic purposes;

d) A swimming pool where the maximum depth measured between the water level and the deepest point in the pool during overflow exceeds 400 mm.

Inflatable toys are included within the scope of this document. However, the electric blower used for continuous inflation of toys must meet the requirements of GB/T 4706.27.

The required household appliances are not included in the scope of this document.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 2411 Plastics and hard rubber - Determination of indentation hardness (Shore hardness) using a hardness tester (GB/T 2411-2008, ISO 868.

2003, IDT)

GB 6675.2 Toy Safety - Part 2.Mechanical and Physical Properties (GB 6675.2-2025, ISO 8124-1.2022, MOD)

3 Terms and Definitions

The terms and definitions defined in GB 6675.2 and the following terms and definitions apply to this document.

3.1

Activity Toys

Designed for family use, it can support the weight of one or more children while they are engaged in activities such as climbing, swinging, sliding, rocking, spinning, and jumping.

A toy whose supporting structure can remain stable when activities such as jumping, crawling, creeping, undulating, and paddling, or multiple activities, are performed simultaneously.

Examples. swings, slides, carousels, climbing frames, rigid playhouses, and wading pools, etc. (see Figure 1).

Note. This definition does not include water toys, non-inflatable trampolines, etc.

END: Draft Version (GB/T 6675.11-2025)