GB/T 42560-2023System and software engineering—Development and operations—Capability maturity model (English PDF)
系统与软件工程 开发运维一体化 能力成熟度模型
This is a limited preview
Buy now to download the full PDF (117 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42560-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 23, 2023
Implementation date
December 1, 2023
Scope
GB/T 42560-2023 is the English-translated version of 系统与软件工程 开发运维一体化 能力成熟度模型.
This document specifies the model and the content of the capability maturity for integrated development and operations, and establishes the capability maturity framework: how the capability domains are divided and what each maturity level means.
Around six capability domains - project management, process improvement, support and assurance, product development, service management and infrastructure - it sets out in detail the capabilities that belong to each and the specific requirements of the practices that support them.
The document applies to an organisation seeking a supplier for the development and operation of software systems and services, to an organisation that wants to demonstrate the maturity of its own software development, delivery and operations management, to one that uses the document to improve that performance continuously, and to the second and third parties who carry out an assessment against it.
Found what you need?
Document preview — GB/T 42560-2023
National Standard of the People's Republic of China
- ICS
- 35.080
- Classification
- L 77
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 3.1 Terms and Definitions
- 3.2 Abbreviations
- 4 Overview
- 4.1 Integration of development, operation and maintenance
- 4.2 Capability Maturity Model
- 5 Project Management
- 5.1 Estimating and Planning (ESP)
- 5.2 Monitoring and Adjustment (MC)
- 5.3 Risk and Opportunity Management (ROM)
- 5.4 Supplier Management (SM)
- 6 Process Improvement
- 6.1 Organizational Governance (GOV)
- 6.2 Process Improvement Infrastructure (PII)
- 6.3 Process Asset Management (PAM)
- 6.4 Process Management (PROM)
- 6.5 Performance Management (PERM)
- 6.6 Organizational Training (OT)
- 7 Support and guarantee
- 7.1 Metrics and Analysis (MA)
- 7.2 Root Cause Analysis and Resolution (CAR)
- 7.3 Configuration Management (CM)
- 7.4 Security Management (SEC)
- 7.5 Decision Analysis and Resolution (DAR)
- 7.6 Process Quality Assurance (PQA)
- 8 Product Development
- 8.1 Product Planning (PDP)
- 8.2 Requirements Engineering (RQE)
- 8.3 Architecture and Design (AD)
- 8.4 Implementation (IMP)
- 8.5 Building and Integration (BI)
- 8.6 Testing (TE)
- 8.7 Continuous Integration and Continuous Delivery (CICD)
- 9 Service Management
- 9.1 Strategic Service Planning (SSP)
- 9.2 Service Delivery (SD)
- 9.3 Service Monitoring (SVCM)
- 9.4 Service Continuity Guarantee (SC)
- 10 Infrastructure
- 10.1 System and Tool Planning (STP)
- 10.2 System and Tool Support (STS)
- 10.3 Environmental Support (ES)
- Appendix A (Informative) Chinese-English Name Comparison Table of Competence Domains
- References
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
Introduction
The integration of development, operation and maintenance gives a new concept to the value of software, that is, deploying software system functions in the production environment and providing users with Continue to provide services as the basis for value judgments. Under the guidance of this basic value, it is necessary for the organization to break down the barriers between different departments;
Establish a common vision for the project or team; quickly and continuously complete the planning, development, delivery, and operation and maintenance of software system functions to realize value Continuous flow.
As a new paradigm of software development and operation and maintenance, the integration of development and operation and maintenance has been increasingly adopted by current mainstream organizations.
Industrial development plays an extremely important role. In order to guide the better application and landing of development, operation and maintenance integration in various industries, and promote organizational efficiency To transform and promote the sustainable development of the industry, this document proposes a capability maturity model for the integration of development, operation and maintenance, collects best practices, and describes The roadmap for the integration of delivery, operation and maintenance from immature to mature. The model consists of a three-layer structure of capability domain, capability and practice set, including project management There are six capability domains, including management, process improvement, support and assurance, product development, service management, and infrastructure, with a total of 30 capabilities, which are critical to software development.
The relevant roles, activities and specific practices involved in the integration of delivery, operation and maintenance have been systematically sorted out and stipulated, which can effectively guide all parties around the software Integrate development, operation and maintenance activities.
1 Scope
This document specifies the model and content of the integrated capability maturity of development, operation and maintenance, and establishes the capability maturity framework, which mainly includes the capability domain Classification and maturity level definitions; around the six major capabilities of project management, process improvement, support and assurance, product development, service management, and infrastructure The force domain defines in detail the capabilities belonging to each competency domain and the specific requirements of each practical activity that supports different capabilities.
This document applies to.
---The organization seeks suppliers to obtain the development and operation and maintenance of software systems and services, and requires to ensure the quality, efficiency and follow-up of software development The quality of long-term operation and maintenance;
---Organizations that want to demonstrate their software development, delivery, and post-operation and maintenance management capabilities and maturity;
--- Organizations that continuously improve the performance of software development, delivery, and post-operation and maintenance management through the effective implementation and operation of this document;
--- The second and third parties who perform the assessment according to the requirements of this document.
2 Normative references
This document has no normative references.
3 Terms, Definitions and Abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
3.1.1 Product artifact
A physical piece of information used or generated by a certain software development and operation and maintenance process.
NOTE: Examples of artifacts are models, source files, text and binary executable files, etc. Artifacts constitute the implementation of a deployable component. [Source: GB/T 11457-2006, 2.76, modified]
3.1.2 Competency
A deep-seated characteristic of an individual that distinguishes high performers from mediocre performers at a given job.
Note: It can be anything that can be reliably measured or counted, such as motivation, traits, self-image, attitudes or values, domain knowledge, cognitive or behavioral skills, and An individual characteristic that significantly distinguishes excellent from average performance.
3.1.3 Configuration baseline
Configuration information formalized at a specific time in the lifecycle of a solution or solution component.
NOTE: Configuration baselines plus approved changes from those baselines constitute current configuration information.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 117 pages — is available in the English PDF.
Similar standards
How to Download GB/T 42560-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 42560-2023
$1,625.00