GB/T 42423-2023Determination of dichlorobenzyl alcohol and chlorphensin in cosmetics—High performance liquid chromatography (English PDF)
化妆品中二氯苯甲醇和氯苯甘醚的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42423-2023 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 17, 2023
Implementation date
October 1, 2023
Scope
GB/T 42423-2023 is the English-translated version of 化妆品中二氯苯甲醇和氯苯甘醚的测定 高效液相色谱法.
GB/T 42423-2023 is the Chinese national high performance liquid chromatography method for measuring dichlorobenzyl alcohol and chlorphenesin in cosmetics.
It describes the principle, the reagents and materials, the instruments, the test procedure, data handling, recovery and precision: the two preservatives are extracted from the sample with methanol, identified by retention time and ultraviolet absorption spectrum, and quantified from peak area by the external standard method, using Class I water to GB/T 6682, standard substances of purity not less than 99.0 %, a 1.0 mg/mL stock solution good for one month at 4 °C, and a 0.45 µm polytetrafluoroethylene filter membrane.
It applies to lotions and to oil-in-water and water-in-oil creams, with a method detection limit of 0.0008 % and a limit of quantification of 0.0025 %. Issued on 17 March 2023, it has applied since 1 October 2023.
Found what you need?
Document preview — GB/T 42423-2023
National Standard of the People's Republic of China
- ICS
- 71.100.70
- Classification
- Y 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principles
- 5 Reagents and Materials
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
1 Scope
This document describes the HPLC method for the determination of dichlorobenzyl alcohol and chlorphenesin in cosmetics, including principles, reagents and materials, Instruments and equipment, test procedures, test data processing, recovery rate, precision, etc.
This document is applicable to the content of dichlorobenzyl alcohol and chlorphenesin in lotion, lotion, cream (oil-in-water), and cream (water-in-oil) cosmetics detection.
The method detection limit of dichlorobenzyl alcohol and chlorphenesin in this document is 0.0008%, and the limit of quantification is 0.0025%.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 6682 Analytical laboratory water specifications and test methods.
3 Terms and Definitions
This document does not have terms and definitions that need to be defined.
4 Principles
Dichlorobenzyl alcohol and chlorphenesin in the sample were extracted by methanol, and determined by high performance liquid chromatography with retention time and ultraviolet absorption spectrum.
The properties were quantified by peak area, and the content of dichlorobenzyl alcohol and chlorphenesin was calculated by external standard method.
5 Reagents and Materials
Unless otherwise specified, all reagents used were chromatographically pure.
5.1 Methanol.
5.2 Water. GB/T 6682, Class I.
5.3 Dichlorobenzyl alcohol and chlorphenesin standard substances. the purity is not less than 99.0%, the English names of dichlorobenzyl alcohol and chlorphenesin, INCI See Table A 1 in Appendix A for name (international cosmetic raw material name), CAS number, molecular formula, relative molecular mass and chemical structural formula.
5.4 Dichlorobenzyl alcohol and chlorphenesin standard stock solution. Accurately weigh 0.1g of each of dichlorobenzyl alcohol and chlorphenesin standard substance (5.3) (accurate to 0.0001g) in a 100mL volumetric flask, dissolved with methanol (5.1) and diluted to the mark. The obtained mass concentration is 1.0mg/mL Standard stock solutions of chlorobenzyl alcohol and chlorphenesin. It can be stored for 1 month at 4°C.
5.5 Filter membrane. the pore size is 0.45 µm, and the material is polytetrafluoroethylene.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 42423-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 42423-2023
$145.00