GB/T 42046-2022Payload transportation requirements for manned spacecraft (English PDF)
载人航天器载荷运输要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 42046-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 12, 2022
Implementation date
October 12, 2022
Scope
GB/T 42046-2022 is the English-translated version of 载人航天器载荷运输要求.
GB/T 42046-2022 states what a payload has to withstand and provide in order to be carried to and from orbit by a Chinese manned spacecraft.
Its contents list covers the environmental conditions of up-and-down transport, with the mechanical environment and the thermal environment and cabin pressure; the payload technical requirements for marking, mechanical, electrical and thermal characteristics, ergonomics and cleanliness control; the safety requirements, including hazard identification and control, safety signs and safety assessment and verification; the transport process, from payload delivery through the loader and the transport itself to recovery and transfer; and the documents each party supplies.
Clause 4 gives the sinusoidal vibration environment of the payload mounting surface in tables by frequency band. Issued on 12 October 2022, it has applied since the same date.
Found what you need?
Document preview — GB/T 42046-2022
National Standard of the People's Republic of China
- ICS
- 49.020
- Classification
- V 71
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Environmental conditions for load transport
- 4.1 Mechanical environment of up-down transport
- 4.2 Thermal environment and cabin pressure during transportation
- 5 Load technical requirements
- 5.1 Flag
- 5.2 Mechanical properties
- 5.3 Electrical Characteristics
- 5.4 Thermal Characteristics
- 5.5 Ergonomics
- 5.6 Cleanliness Control
- 6 Security requirements
- 6.1 General requirements
- 6.2 Hazard identification and control
- 6.3 Safety signs
- 6.4 Security Assessment and Verification
- 7 Load transportation process and requirements
- 7.1 Load Transport Process
- 7.2 Payload delivery
- 7.3 Load loader
- 7.4 Load transport
- 7.5 Load recovery and transfer
- 8 Document Requirements
- 8.1 Documents provided by the load party
- 8.2 Documents provided by the manned spacecraft developer
- 8.3 Other documents
- Appendix A (Informative) Manned Spacecraft Load Transfer Table
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the environmental conditions, technical requirements, safety requirements, Load transportation process and documentation requirements.
This document is applicable to the mission phase of the space station. After the payload is installed, it is transported on the ground and up and down with the manned spacecraft (hereinafter referred to as "the payload"). Transport") work load design, transport implementation and process management.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB 19489-2008 General requirements for laboratory biosafety
GB/T 29083-2012 Safety requirements for flammable, explosive, toxic and radioactive sources of spacecraft
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Payload
Instruments, samples and other materials used to complete user-specified tasks or functions are transported up or down by manned spacecraft.
4 Environmental conditions of load transportation
4.1 Mechanical environment of up-down transport
4.1.1 Sinusoidal vibration environment
The sinusoidal vibration environment of the load mounting surface is shown in Table 1 and Table 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 42046-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 19489-2008 — Laboratories - General requirements for biosafety
GB/T 29083-2012 — Safety requirements for flammable materials, explosive devices, toxic substances and radioactive sources in spacecraft
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 42046-2022
$240.00