Valid

GB/T 42032-2022Requirement for design of civil aircraft loadsheet (English PDF)

民用飞机装载舱单设计要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for GB/T 42032-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 12, 2022

Implementation date

October 12, 2022

Scope

GB/T 42032-2022 is the English-translated version of 民用飞机装载舱单设计要求.

GB/T 42032-2022 fixes what the loading manifest of a civil aircraft has to contain and how it is drawn up, with basic requirements plus separate design requirements for the load table and for the balance chart; clause 4 requires the manifest to include both and to be calculated from the weight balance data of the aircraft type and the customised requirements.

Clause 1 applies it to the design of loading manifests for civil passenger aircraft, with other transport aircraft able to refer to it. It defines the loading manifest, the weight centre-of-gravity envelope built from the maximum zero fuel, landing and take-off weights with their forward and aft limits, and curtailment.

Informative annexes give example manifests, load tables and balance charts. Issued on 12 October 2022, it has applied since that same date.

Found what you need?

Document preview — GB/T 42032-2022

National Standard of the People's Republic of China

ICS
49.020
Classification
V 01

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Basic requirements
  • 5 Load table design requirements
  • 6 Balance diagram design requirements
  • Appendix A (Informative) Example of Aircraft Loading Manifest
  • Appendix B (informative) Example 15 of the load table
  • Appendix C (Informative) Example of Equilibrium Diagram

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

Introduction

The loading manifest is usually an important document provided to aircraft operators, one for each type of aircraft according to each cabin layout Load manifest.

During the operation of the aircraft, the aircraft operator uses the loading manifest to calculate "weight, center of gravity, horizontal stabilizer trim angle" and other information, and provides information for each The flight of one flight provides the basis for release and is an important tool for stowage work.

Provide aircraft operators with the design of loading manifests that meet regulatory and operational requirements based on aircraft weight balance data, customized requirements, etc. The process is an important part of the stowage work. Civil aircraft loading manifest design requirements

1 Scope

This document specifies the basic requirements for the design of the civil aircraft loading manifest, the design of the load table and the design of the balance chart.

This document applies to the design of passenger aircraft loading manifests for civil aircraft. Other transport aircraft can be used for reference.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Loading manifest load sheet

Records data related to aircraft load balance and files for weight center of gravity calculation.

3.2 Weight center of gravity envelope loading envelope

It is composed of characteristic weights such as maximum zero fuel weight, maximum landing weight, and maximum take-off weight and their corresponding front and rear limits of the center of gravity. Closed geometry.

3.3 Cut curtailment

According to the possible influence of various factors on the center of gravity of the aircraft in operation, the front and rear limits of the airworthiness certificated weight center of gravity envelope are carried out.

Downsize, the process of establishing a tighter weight center of gravity envelope.

4 Basic requirements

4.1 The design of the loading manifest shall include the load table and balance chart, see Appendix A.

4.2 The design of the loading manifest shall be calculated and compiled according to the weight balance data of the aircraft type, customized requirements and other data.

5 Load table design requirements

5.1 The design content of the load table should include but not be limited to the information given in Table 1. The schematic diagram of the load table is shown in Figure 1. The load table should be in a fixed format, see Appendix B.

5.2 The cargo compartments in the column of load calculation and space layout in Table 1 shall be designed according to the requirements of cargo compartments.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Similar standards

How to Download GB/T 42032-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 42032-2022

$315.00