Valid

GB/T 41948-2022Particle characterization-Sample preparation (English PDF)

颗粒表征 样品准备

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41948-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 30, 2022

Implementation date

April 1, 2023

Scope

GB/T 41948-2022 is the English-translated version of 颗粒表征 样品准备.

GB/T 41948-2022 establishes how a sample is prepared for particle characterization. It sets the procedures and the operating requirements for sampling, for preparing the sample and for transferring it, so that the portion finally measured really represents the material it came from.

It applies to the preparation of samples of powders with a particle size below 10 mm, of solid particles suspended in a liquid and of liquid particles in a liquid medium.

Particle laboratories, powder producers and their customers use it. Issued on 30 December 2022, it has applied since 1 April 2023.

Found what you need?

Document preview — GB/T 41948-2022

National Standard of the People's Republic of China

ICS
19.120
Classification
A 28

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms, definitions and symbols
  • 3.1 Terms and Definitions
  • 3.2 Symbol
  • 4 General
  • 5 sample
  • 5.1 Overview
  • 5.2 Sample acquisition
  • 5.3 Sample division
  • 5.4 Minimum measurement sample size
  • 6 sample preparation
  • 6.1 Sample preparation link
  • 6.2 Selection of dispersion medium
  • 6.3 Selection of decentralized methods
  • 6.4 Concentration adjustment of samples to be tested
  • 7 Sample Transfer
  • Appendix A (Informative) Classification of Particle Dispersion Systems
  • Appendix B (Informative) Methods of Obtaining Common Samples
  • Appendix C (Informative) Decomposition method of commonly used powder samples
  • Appendix D (informative) Surfactants commonly used in particle dispersion
  • Appendix E (informative) Practical steps for dispersing powders in liquids
  • Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

Introduction

Granular materials play an important role in many fields of the national economy. In the research and development, preparation, production and application of granular materials, all Characterization of particle properties is inseparable. Characterization techniques include but are not limited to static or dynamic light scattering, electrical resistance, photoresisting, static or dynamic Image method, ultrasonic method, gravity or centrifugal sedimentation method, gas permeation method, gas adsorption method, etc. In addition to the need for various characterization techniques and analytical instruments In addition to standardization, the standardization of particle characterization sample preparation process (including sampling, sample preparation and sample transfer, etc.) is also crucial. suitable and Proper sample preparation is a must for correct particle characterization. This document is intended to establish procedures for the preparation of samples for particle characterization.

1 Scope

This document establishes procedures for the preparation of samples for the characterization of granular materials, and specifies the operational methods and procedures for sampling, sample preparation, and sample transfer. Require.

This document applies to powders with a particle size of less than 10 mm, solid particles in liquid media, and liquid particles in liquid media. sample preparation.

2 Normative references

This document has no normative references.

3 Terms, definitions and symbols

3.1 Terms and Definitions

The following terms and definitions apply to this document.

3.1.1 Surfactants

A class of substances that reduce the interfacial energy of materials in contact with liquids. [Source: ISO /T S22107.2021, 3.16, with modifications]

3.1.2 Dispersant

Additives that increase and improve the dispersion properties of solid or liquid materials.

3.1.3 Wetting agent

A surfactant solution or solvent that makes a material more wettable by lowering the surface energy of a solid material.

3.1.4 Polydisperse

A feature that has different values for a property of different particles in a granular system.

3.1.5 Aggregate

New particles formed by strongly bound or fused particles may have an outer surface area significantly smaller than the sum of the individual particle surface areas.

Note 1.The forces supporting aggregates are all strong forces, such as covalent bonds or originating from sintering or complex physical entanglement, or primary particles combined in other ways.

Note 2.Aggregates are also called "secondary particles", while primary particles are called "primary particles". [Source: ISO 26824:2013,1.3]

3.1.6 Agglomerates

Particles held together by weak to moderate forces having an external surface area approximately equal to the sum of the surface areas of the individual particles.

NOTE 1: The forces supporting the aggregates are all weak forces, such as van der Waals forces or simple physical entanglements.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 41948-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41948-2022

$255.00