Valid

GB/T 41785-2022General specification for hybrid storage system consolidating magnetic, optical, and electric media (English PDF)

磁光电混合存储系统通用规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41785-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2022

Implementation date

May 1, 2023

Scope

GB/T 41785-2022 is the English-translated version of 磁光电混合存储系统通用规范.

GB/T 41785-2022 is the Chinese standard "General specification for hybrid storage system consolidating magnetic, optical, and electric media".

Its scope clause reads: This document gives the composition and classification of the magneto-optical hybrid storage system, and specifies the technical requirements and test methods of the magneto-optical hybrid storage system. law, quality assessment procedures, as well as marking, packaging, transport and storage.

This document applies to the design, development, production, testing and application of magneto-optical hybrid storage systems. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 41785-2022

National Standard of the People's Republic of China

ICS: 35.220
Classification: L 66

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Abbreviations
5 Composition and classification
5.1 Composition
5.2 Category
6 Technical requirements
6.1 Appearance and safety protection
6.2 Function
6.3 Performance
6.4 Storage capacity
6.5 Compatibility
6.6 Safety
6.7 Reliability
6.8 Power consumption
6.9 Noise
6.10 Electromagnetic compatibility
6.11 Power adaptability
6.12 Environmental adaptability
6.13 Limits for restricted substances
7 Test methods
7.1 Test environmental conditions
7.2 Appearance and safety protection
7.3 Function
7.4 Performance
7.5 Storage capacity
7.6 Compatibility
7.7 Safety
7.8 Reliability
7.9 Power consumption
7.10 Noise
7.11 Electromagnetic compatibility
7.12 Power adaptability
7.13 Environmental adaptability
7.14 Determination of restricted substances
8 Quality assessment procedures
8.1 General provisions
8.2 Inspection classification
8.3 Type test
8.4 Lot-by-lot inspection
8.5 Periodic Inspection
9 Marking, packaging, transportation and storage
9.1 Flags
9.2 Packaging
9.3 Transport
9.4 Storage
Appendix A (Normative) Classification and Criteria for Failures

1 Scope

This document gives the composition and classification of the magneto-optical hybrid storage system, and specifies the technical requirements and test methods of the magneto-optical hybrid storage system.

law, quality assessment procedures, as well as marking, packaging, transport and storage.

This document applies to the design, development, production, testing and application of magneto-optical hybrid storage systems.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB/T 2422-2012 Guidelines for Compilation of Test Methods for Environmental Testing Terms and Definitions

GB/T 2423.1-2008 Environmental Testing of Electrical and Electronic Products Part 2.Test Methods Test A. Low Temperature

GB/T 2423.2-2008 Environmental testing of electrical and electronic products - Part 2.Test method Test B. High temperature

GB/T 2423.3-2016 Environmental Test Part 2.Test Method Test Cab. Constant Damp Heat Test

GB/T 2423.5-2019 Environmental Testing Part 2.Test Methods Test Ea and Guidelines. Shock

GB/T 2423.10-2019 Environmental Testing Part 2.Test Methods Test Fc. Vibration (Sinusoidal)

GB/T 2828.1-2012 Counting Sampling Inspection Procedures Part 1.Lot-by-Lot Inspection Sampling Retrieved by Acceptance Quality Limit (AQL) plan

GB/T 4857.2-2005 Basic tests for packaging and transport packages - Part 2.Temperature and humidity conditioning treatment

GB/T 4857.5-1992 Drop test method for packaging and transportation packages

GB 4943.1-2011 Information Technology Equipment Safety Part 1.General Requirements

GB/T 5080.7-1986 Equipment reliability test - verification test of failure rate and mean time between failures under the assumption of constant failure rate test plan

GB/T 5271.14-2008 Information Technology Vocabulary Part 14.Reliability, Maintainability and Availability

GB/T 9254-2008 Radio disturbance limits and measurement methods for information technology equipment

GB/T 15934-2008 Electrical accessories wire assemblies and interconnecting wire assemblies

GB/T 17618-2015 Information Technology Equipment Immunity Limits and Measurement Methods

GB 17625.1-2012 Electromagnetic Compatibility Limits Harmonic Current Emission Limits (Each Phase Input Current<=16A)

GB/T 18313-2001 Measurement of airborne noise of acoustic information technology equipment and communication equipment

GB/T 18455-2010 Packaging Recycling Mark

GB/T 26125-2011 Six restricted substances in electrical and electronic products (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) determination of

GB/T 26572-2011 Limitation Requirements for Restricted Substances in Electrical and Electronic Products

3 Terms and Definitions

The following terms and definitions apply to this document.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 9254-2008 · GB/T 17618-2015

Similar standards

GB/T 46448-2025|GB/T 14307-2025|GB/T 46352-2025|GB/T 12628-2008|GB/T 12627-1990|GB/T 46366-2025

How to Download GB/T 41785-2022

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.