GB/T 41723-2022Automation systems and integration—Digital twin architecture of complex product (English PDF)
自动化系统与集成 复杂产品数字孪生体系架构
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41723-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2022
Implementation date
May 1, 2023
Scope
GB/T 41723-2022 is the English-translated version of 自动化系统与集成 复杂产品数字孪生体系架构.
GB/T 41723-2022 sets out a digital twin architecture for complex products, DTA-CP, covering the design, manufacturing and service stages of their life cycle. The architecture has five layers: physical space, virtual and real data management, the digital twin model, business interaction, and application and decision.
The document then gives the logical architecture and the functions of four main modules - virtual and real data management, the digital twin model, physical-virtual space synchronous mapping, and design-manufacture-service collaboration.
It defines complex products, digital twin, the digital twin model, big data and model based definition, taking those entries from GB/T 36457-2018, ISO/TR 24464:2020, ISO/IEC 20546:2019 and GB/T 36252-2018.
It has no normative references and is aimed at the top-level planning and intelligent upgrading of such systems. It was issued on 14 October 2022 and has applied since 1 May 2023.
Found what you need?
Document preview — GB/T 41723-2022
National Standard of the People's Republic of China
- ICS
- 35.240.50
- Classification
- J 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 DTA-CP Architecture
- 5.1 Overview
- 5.2 Physical space layer
- 5.3 Virtual and real data management layer
- 5.4 Digital Twin Model Layer
- 5.5 Business Interaction Layer
- 5.6 Application and Decision Layer
- 6 Logical Architecture and Functions of Main Modules of DTA-CP
- 6.1 Virtual and Real Data Management Logical Architecture and Functions
- 6.2 Digital Twin Model Logical Architecture and Function
- 6.3 Physical-Virtual Space Synchronization Mapping Logical Architecture and Function
- 6.4 Design-Manufacture-Service Collaboration Logical Architecture and Function
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
Introduction
The design, manufacture and service of complex products involve the association and coupling between different fields, disciplines and systems. To improve complex production improve the efficiency and quality of product R&D, manufacturing, operation and maintenance, etc., improve the management and control level of its main business and its own level of intelligence, including actual Real-time simulation and prediction of complex product performance, establishment of real-time mapping and interaction between virtual space and physical space of complex products, based on virtual space The simulation results guide and control the physical entities of complex products, promote the integration and collaboration of major businesses in all stages of design-manufacturing-service, and improve complex Product self-diagnosis and self-decision-making capabilities, etc., it is urgent to adopt a new generation of information technology and advanced data analysis technology to design, manufacture and analyze complex products. Intelligent management and control of services and other processes.
The complex product digital twin architecture proposed in this document starts from the life cycle stages of design, manufacturing and service, and adopts digital twin Technology to establish and manage virtual and real data and digital twin models of complex product design, manufacturing and service processes, and then realize digital twin drive Real-time mapping of virtual and real space for complex product design, manufacturing and service, and interactive collaboration of business activities under the Provide solutions and ideas for energy and chemical upgrading of complex products, and form an intelligent complex with the characteristics of self-adaptation, self-decision, self-diagnosis, virtual-real interaction, etc.
1 Scope
This document specifies the digital twin architecture of complex products, and specifies the virtual reality of complex products in the process of design, manufacture and service Logical architecture of data management module, digital twin model module, physical-virtual space synchronous mapping module, design-manufacturing-service collaboration module with the main function.
This document is applicable to the top-level planning and intelligent upgrade of the digital twin system of complex product design, manufacturing and service processes.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Complex products
A type of product with complex customer needs, complex product composition, complex product technology, complex manufacturing process, and complex production management. [Source: GB/T 36457-2018, 3.1]
3.2 Digital twin
Hybrid model consisting of physical assets, virtual images, and user interfaces. [Source: ISO/TR 24464:2020, 3.1.4]
3.3 Digital twin model
It integrates a multi-disciplinary, multi-physics, multi-scale, multi-probability digital model collection, which can make full use of realistic physical models, sensors Operation history and other data, complete the real-time mapping of physical entities in the virtual space, and reflect the design, manufacture and service of complex product physical entities The physical activities of the process, and produce virtual and real interaction effects with it.
3.4 Big data
Massive, multi-source, heterogeneous real-time/non-real-time data generated in the design, manufacturing and service process of complex products, with large amounts of data and various types of data.
With the characteristics of a wide variety, fast data generation, and fast data change and update, scalable technology can be used for storage, processing, management and analysis. [Source: ISO/IEC 20546:2019, 3.1.2, with modifications]
3.5 Model based definition
A complete product definition defined by a dataset of precise geometric entities, related 3D geometry, 3D annotations and attributes. [Source: GB/T 36252-2018, 3.1.3]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 41723-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 41723-2022
$240.00