Valid

GB/T 41613-2022Technical requirements of data collection for shale gas development evaluation (English PDF)

页岩气开发评价资料录取技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41613-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 11, 2022

Implementation date

November 1, 2022

Scope

GB/T 41613-2022 is the English-translated version of 页岩气开发评价资料录取技术要求.

GB/T 41613-2022 specifies which data are collected for the development evaluation of shale gas, and to what technical requirements.

The data are grouped by discipline: geology, drilling, fracturing, development and production, surface gathering, safety and environmental protection, and economic evaluation; a further clause covers the management of what has been collected.

The collection follows the principle of being comprehensive and systematic, of combining dynamic with static data and of being timely and accurate, and it applies to the whole life cycle of a shale gas development.

The document defines no terms of its own and cites a long list of other standards, among them GB/T 31483, GB/T 33583, NB/T 14025, NB/T 14026, SY/T 6176 and SY/T 7070. It was issued on 11 July 2022 and has applied since 1 November 2022.

Found what you need?

Document preview — GB/T 41613-2022

National Standard of the People's Republic of China

ICS: 75.020
Classification: E 12

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Principle
5 Contents and technical requirements for data admission
5.1 Geology
5.2 Drilling
5.3 Fracturing
5.4 Development and Production
5.5 Ground Gathering
5.6 Safety and environmental protection
5.7 Economic Evaluation
6 Data Management

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

This document is proposed and managed by the National Natural Gas Standardization Technical Committee (SAC/TC244).

1 Scope

This document specifies the principles, contents and technical requirements for the admission of shale gas development evaluation materials.

This document is applicable to the admission of development evaluation data for the whole life cycle of shale gas.

2 Normative references

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.

GB 12348 Industrial Enterprise Boundary Environmental Noise Emission Standard

GB 12523 Environmental Noise Emission Standard for Construction Sites

GB/T 31483 Shale Gas Geological Evaluation Method

GB/T 33583 Technical Specifications for Acquisition of Onshore Petroleum Seismic Exploration Data

GB 37822 Volatile organic compound fugitive emission control standard

GB/T 50493 Petrochemical flammable and toxic gas detection and alarm design standards

HJ/T 55 Technical guidelines for monitoring fugitive emissions of air pollutants

HJ 610 Environmental Impact Assessment Technical Guidelines Groundwater Environment

NB/T 10251 Technical specification for micro-injection testing in shale gas wells

NB/T 14002.4 Shale Gas Reservoir Stimulation Part 4: Recommended Practice for Horizontal Well Pumping Bridge Plug-Perforation Combined Technology

NB/T 14002.5 Shale Gas Reservoir Stimulation Part 5: Operational Requirements for Drilling and Grinding Bridge Plugs in Horizontal Wells

NB/T 14025 Technical Specification for Well Testing of Shale Gas Wells

NB/T 14026 Technical requirements for geosteering of shale gas horizontal wells

SY/T 5788.2 Specification for gas logging and logging for oil and gas exploration wells

SY/T 5788.3 Specification for Geological Logging of Oil and Gas Wells

SY/T 6127 Specification for the entry of data on downhole operations in oil and gas wells

SY/T 6176 Technical Specification for Data Acquisition of Gas Reservoir Development Wells

SY/T 6177 Technical requirements for economic evaluation of gas field development plans and adjustment plans

SY/T 7070 Microseismic Well Monitoring Technical Specification

SY/T 7372 Microseismic Surface Monitoring Technical Regulations

SY/T 7420 X-ray fluorescence spectrometry element logging specification

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

4 Principles

Based on the principle of comprehensive and systematic, dynamic and static combination, timely and accurate, the development evaluation data of shale gas life cycle will be admitted.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

SY/T 5788.3 · SY/T 6176

Similar standards

GB/T 28910-2026|GB/T 34163-2026|GB/T 35212.5-2026|GB/T 47034.1-2026|GB/T 47442.1-2026|GB/T 28912-2025

How to Download GB/T 41613-2022

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.