GB/T 41437-2022Determination of naringin and denatonium benzoate in finger paints—High performance liquid chromatography (English PDF)
指画颜料中苦味剂柚皮苷和苯甲酸地那铵含量的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41437-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 15, 2022
Implementation date
April 15, 2022
Scope
GB/T 41437-2022 is the English-translated version of 指画颜料中苦味剂柚皮苷和苯甲酸地那铵含量的测定 高效液相色谱法.
GB/T 41437-2022 is the Chinese national method for determining naringin and denatonium benzoate in finger paints by high performance liquid chromatography.
It describes the principle, the reagents and apparatus, the preparation and extraction of the sample, the chromatographic conditions, the identification and quantification of the two bittering agents, the calculation and the test report.
It applies to finger paints, where these substances are added so that a child spits the paint out instead of swallowing it. Toy makers, importers and testing laboratories use it. Issued on 15 April 2022, it applies from the same date.
Found what you need?
Document preview — GB/T 41437-2022
National Standard of the People's Republic of China
- ICS
- 97.200.50
- Classification
- Y 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principles
- 5 Reagents and Materials
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document describes a high-performance liquid chromatography method for the determination of naringin and denatonium benzoate in finger paints.
This document applies to the determination of naringin and denatonium benzoate in finger paints.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analysis Laboratory Water Specifications and Test Methods
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document.
4 Principles
Ethanol was used as the extraction solvent, ultrasonically extracted for 10 min, centrifuged, the supernatant was taken out, the residue was extracted again, and the two extractions were combined.
The liquid was evaporated to near dryness, and 50% methanol aqueous solution was added to dissolve the residue. After filtration, high performance liquid chromatography was used for separation and diode array detection. Quantification by external standard method.
5 Reagents and Materials
The following reagents, unless otherwise specified, use only chromatographically pure reagents and above. The laboratory water meets the first-class water specified in GB/T 6682 Require.
5.2 Methanol.
5.3 50% methanol aqueous solution (volume fraction).
5.4 Acetonitrile.
5.5 Potassium dihydrogen phosphate.
5.6 Phosphoric acid.
5.7 0.02mol/L potassium dihydrogen phosphate solution (pH=4.3). weigh 2.72g potassium dihydrogen phosphate (5.5), dissolve it in accordance with GB/T 6682 In the first-grade water, the volume was adjusted to 1L, and the pH value was adjusted to 4.3 with phosphoric acid (5.6).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 41437-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 41437-2022
$150.00