GB/T 41436-2022Determination of triclosan and triclocarban in finger paints—High performance liquid chromatography (English PDF)
指画颜料中三氯生和三氯卡班含量的测定 高效液相色谱法
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41436-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 15, 2022
Implementation date
April 15, 2022
Scope
GB/T 41436-2022 is the English-translated version of 指画颜料中三氯生和三氯卡班含量的测定 高效液相色谱法.
GB/T 41436-2022 is the Chinese national method for determining triclosan and triclocarban in finger paints by high performance liquid chromatography.
It describes the principle, the reagents and apparatus, the preparation and extraction of the sample, the chromatographic conditions, the identification and quantification of the two preservatives, the calculation and the test report.
It applies to finger paints, the paints young children spread with their hands. Toy and paint makers, importers and testing laboratories use it. Issued on 15 April 2022, it applies from the same date.
Found what you need?
Document preview — GB/T 41436-2022
National Standard of the People's Republic of China
- ICS
- 97.200.50
- Classification
- Y 57
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principles
- 5 Reagents and Materials
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document describes a high-performance liquid chromatography method for the determination of triclosan and triclocarban content in finger paints.
This document applies to the determination of triclosan and triclocarban in finger paints.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 6682 Analysis Laboratory Water Specifications and Test Methods
3 Terms and Definitions
There are no terms and definitions that need to be defined in this document.
4 Principles
Methanol was used as the extraction solvent, ultrasonically extracted for 10 min, centrifuged, the supernatant was taken out, the residue was extracted again, and the two extractions were combined.
After filtration, high performance liquid chromatography was used for separation, diode array detector detection, and external standard method for quantification.
5 Reagents and Materials
The following reagents, unless otherwise specified, use only chromatographically pure reagents and above. The laboratory water meets the first-class water specified in GB/T 6682 Require.
5.2 Triclosan (CAS number. 3380-34-5) and triclocarban (CAS number. 101-20-2) standard products. the purity is not less than 99%.
5.3 Triclosan standard stock solution. Weigh an appropriate amount of triclosan (accurate to 0.1 mg) standard substance, and prepare it with methanol (5.1) to a mass concentration of 1000mg/L standard stock solution, placed in -18 °C refrigerator, valid for 6 months.
5.4 Standard stock solution of triclocarban. Weigh an appropriate amount of triclocarban (accurate to 0.1 mg) standard substance, and prepare the mass concentration with methanol (5.1).
5.5 Triclosan standard working solution. Dilute the triclosan standard stock solution (5.3) stepwise with methanol (5.1) to prepare a set of standard working solutions.
5.1 Methanol
It is a standard stock solution of 1000 mg/L, placed in a -18 °C refrigerator, and the validity period is 6 months.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 41436-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 41436-2022
$150.00