Valid

GB/T 41412-2022Determination of isothiazolinone preservatives in toys—High performance liquid chromatography-tandem mass spectrometry (English PDF)

玩具中异噻唑啉酮类防腐剂的测定 高效液相色谱-串联质谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41412-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 15, 2022

Implementation date

April 15, 2022

Scope

GB/T 41412-2022 is the English-translated version of 玩具中异噻唑啉酮类防腐剂的测定 高效液相色谱-串联质谱法.

GB/T 41412-2022 is the Chinese method for finding isothiazolinone preservatives in toys by high performance liquid chromatography-tandem mass spectrometry.

It determines 2-methyl-4-isothiazolin-3-one (MIT), 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 1,2-benzisothiazolin-3-one (BIT); other preservatives may be determined by reference to it once the method has been verified.

The sample is extracted with methanol under ultrasound at room temperature, the extract is filtered through a membrane and injected, and the result is quantified against the labelled internal standards MIT-d3, CMIT-d3 and BIT-13C6.

The document lists the reagents and standard solutions, the instruments, the sample preparation and determination steps, the calculation, the precision and what the test report must state.

The limit of quantification is 0.040 mg/kg for all three substances. It was issued on 15 April 2022 and has applied since 15 April 2022.

Found what you need?

Document preview — GB/T 41412-2022

National Standard of the People's Republic of China

ICS
97.200.50
Classification
Y 57

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Terms and definitions4
  • 4 Principle4
  • 5 Reagents and materials5
  • 6 Instruments and equipment5
  • 7 Pre-preparation of sample6
  • 8 Determination6
  • 9 Result calculation8
  • 10 Method limits of quantification9
  • 11 Precision9
  • 12 Test report9
  • Annex A (normative) Information on the target substances (3 preservatives) determined in this document10
  • Annex B (informative) Total ion chromatogram of 3 preservatives11
  • Annex C (informative) Precision test results12

1 Scope

This Standard specifies high performance liquid chromatography-tandem mass spectrometry for determination of isothiazolinone preservatives in toys.

This Standard applies to determination of 2-methyl-4-isothiazolin-3-one (MIT), 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 1,2-benzisothiazoline-3-ketone (BIT) in toys. Other preservatives can be determined with reference to this document after verification.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 6682, Water for analytical laboratory use - Specification and test methods

3 Terms and definitions

There are no terms and definitions that need to be defined in this document.

4 Principle

After the sample is prepared, use methanol to conduct ultrasonic extraction at room temperature. The extract is filtered by a filter membrane and then determined by high performance liquid chromatography-tandem mass spectrometer. Quantify by internal standard method.

5 Reagents and materials

5.1 Water: Grade 1 water specified in GB/T 6682.

5.2 Methanol: Chromatographically pure.

5.3 Preservative standard material: Purity is >=95%; Annex A gives the specific information of MIT, CMIT and BIT.

5.4 Internal standard substance: 2-methyl-4-isothiazolin-3-one-d3 hydrochloride salt, referred to as MIT-d3, CAS No. is 1329509-49-0; Purity is >=95%.

5.5 Internal standard substance: 5-chloro-2-methyl-4-isothiazolin-3-one-d3, referred to as CMIT-d3, CAS No. is 1329611-34-8); Purity is >=95%.

5.6 Internal standard substance: 1,2-benzisothiazolin-3-one-13C6, referred to as BIT-13C6, CAS No. is 1329616-16-1; Purity is >=95%.

5.7 Standard stock solution: Respectively and accurately weigh an appropriate amount of preservative reference material (5.3). Use methanol (5.2) to prepare a standard stock solution with a mass concentration of 100.0mg/L.

5.8 Internal standard mixed solution: Accurately weigh an appropriate amount of internal standard substances MIT-d3 (5.4), CMIT-d3 (5.5) and BIT-13C6 (5.6). Use methanol (5.2) to dilute and obtain internal standard mixed solutions with mass concentrations of 1.0mg/L, 3.0mg/L and 1.0mg/L, respectively.

5.9 Standard mixed working solution: Pipette an appropriate volume of the preservative standard stock solution (5.7) into a volumetric flask. Use methanol (5.2) to set volume to the scale mark. Obtain a standard mixed solution with a mass concentration of 10.0mg/L. Use methanol (5.2) and stepwise dilution method to dilute the standard mixed solution and obtain a series of standard mixed working solutions with mass concentrations of 0.0005mg/L, 0.001mg/L, 0.005mg/L, 0.01mg/L, 0.02mg/L and 0.05mg/L. Take 1.0mL of a series of standard mixed working solutions into the injection bottle. Add 0.050mL of internal standard mixed solution (5.8). Mix well.

5.10 Microporous membrane: Organic phase, with a pore size of 0.22µm.

6 Instruments and equipment

6.1 High performance liquid chromatography-tandem mass spectrometer: Equipped with electrospray ionization (ESI).

6.2 Ultrasonic extractor.

6.3 Analytical balance: Accuracy is 0.1 mg. […]

10 Method limits of quantification

The method limits of quantification for MIT, CMIT and BIT in this document are all 0.040mg/kg.

11 Precision

See Annex C for the precision test results of the method in this document.

12 Test report

The test report shall at least give the following information:

a) Specimen description;

b) Reference (including the year number) to this document;

c) Test results;

d) Variations from the prescribed analysis steps;

e) Anomalies observed in tests;

f) Test date. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 41412-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41412-2022

$150.00