GB/T 41404-2022Determination of platinum content in platinum alloys—Spark atomic emission spectrometric method (difference method) (English PDF)
铂合金中铂含量的测定 火花原子发射光谱法(差减法)
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41404-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41404-2022 is the English-translated version of 铂合金中铂含量的测定 火花原子发射光谱法(差减法).
GB/T 41404-2022 is the Chinese national method for determining the platinum content of a platinum alloy by spark atomic emission spectrometry, the platinum being obtained by difference.
It gives the principle, the reagents and materials, the instruments, the preparation of the sample, the test procedure, the precision of the method and the test report.
It applies to platinum alloys with a platinum content from 99.00 % to 99.99 %, the range in which jewellery and industrial alloys are assayed. Refiners, jewellery makers and assay laboratories use it. Issued on 9 March 2022, it has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 41404-2022
National Standard of the People's Republic of China
- ICS
- 39.060
- Classification
- Y 88
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Principles
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document specifies the principles, reagents and materials, instruments, sample preparation, Test procedure, precision and test report.
This document applies to the determination of platinum in platinum alloys with a platinum content of 99.00% to 99.99%.
2 Normative references
The contents of the following documents constitute indispensable provisions of this document through normative references in the text, among which the dated references are. documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 6379.1 Accuracy (correctness and precision) of measurement methods and results - Part 1: General provisions and definitions
GB/T 6379.2 Accuracy (correctness and precision) of measurement methods and results - Part 2: Determining repetition of standard measurement methods Basic Methods of Reproducibility and Reproducibility
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Repeatabilitylimit
A numerical value, under repeatability conditions, the probability that the absolute difference between the final values of two test results or measurement results is less than or equal to this numerical value is 95%. [Source: GB/T 6379.1-2004, 3.16, with modifications]
3.2 Reproducibilitylimit
A numerical value, under conditions of reproducibility, the probability that the absolute difference between the final values of two test results or measurement results is less than or equal to this numerical value is 95%. [Source: GB/T 6379.1-2004, 3.20, with modifications]
4 Principles
When a platinum alloy sample with a flat surface is excited by an electric spark discharge, when the atoms or ions of the measured element are excited, the electrons have different energies in the atoms.
Level transition, when the transition from high energy state to low energy state produces characteristic spectral lines, by measuring the wavelength and intensity of characteristic spectral lines, according to the The relationship between the intensity of the characteristic spectral line of the measured element and the content was calculated, and the content of the measured element was calculated through the calibration curve. By subtraction, the platinum content.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 6379.1Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
- GB/T 6379.2Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
Similar standards
How to Download GB/T 41404-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6379.1-2004 — Accuracy (trueness and precision) of measurement methods and results -- Part 1: General principles and definitions
GB/T 6379.2-2004 — Measurement methods and results -- Accuracy (trueness and precision) -- Part 2: Determine the standard methods of measurement repeatability and reproducibility of the basic method
GB/T 6379.2-2026 — Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 41404-2022
$150.00