Valid

GB/T 41402-2022Logistics robots—General technical specification for information system (English PDF)

物流机器人 信息系统通用技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41402-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

April 15, 2022

Implementation date

November 1, 2022

Scope

GB/T 41402-2022 is the English-translated version of 物流机器人 信息系统通用技术规范.

GB/T 41402-2022 is the Chinese general technical specification for the information system of logistics robots, the software that dispatches and tracks a fleet.

It sets the general requirements, the functional requirements, the performance requirements, the communication requirements, the safety requirements, the reliability requirements and the requirements on operation and maintenance, and describes the test methods that correspond to them.

It applies to the design, construction and testing of logistics robot information systems. Robot makers, warehouse operators and system integrators use it. Issued on 15 April 2022, it has applied since 1 November 2022.

Found what you need?

Document preview — GB/T 41402-2022

National Standard of the People's Republic of China

ICS
25.040.30
Classification
L 67

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms, Definitions and Abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Abbreviations
  • 4 General Requirements
  • 4.1 System Composition
  • 4.2 System Design
  • 5 Functional Requirements
  • 5.1 Management Subsystem
  • 5.2 Scheduling Subsystem
  • 6 Performance Requirements
  • 7 Communication requirements
  • 7.1 System and Logistics Robot Communication
  • 7.2 Communication between the system and MES, WMS third-party system
  • 7.3 System Communication with External Devices
  • 8 Safety requirements
  • 8.1 General safety requirements
  • 8.2 Data transmission security
  • 8.3 Database Security
  • 8.4 Network Firewall Security
  • 8.5 User authentication and identification security
  • 9 Reliability Requirements
  • 10 O&M Requirements
  • 10.1 System Maintenance
  • 10.2 Data update and maintenance
  • 11 Test methods
  • 11.1 Test environment deployment
  • 11.2 Test conditions
  • 11.3 Functional testing
  • 11.4 Performance testing
  • 11.5 Communication Test
  • 11.6 Security testing
  • 11.7 Reliability testing
  • Appendix A (Normative) Map Element Types
  • Reference

1 Scope

This document specifies the general requirements, functional requirements, performance requirements, communication requirements, safety requirements, reliability requirements of the logistics robot information system requirements, operation and maintenance requirements, and describe the corresponding test methods.

This document applies to the design, construction and testing of logistics robot information systems.

2 Normative references

There are no normative references in this document.

3 Terms, Definitions and Abbreviations

3.1 Terms and Definitions

The following terms and definitions apply to this document.

3.1.1 Logisticsrobot

A self-propelled vehicle capable of transporting or manipulating, characterized by wheeled movement, moving along a preset route based on environmental markers or external guidance signals Primary mobile device.

3.1.2 Logistics robot system

It is managed and controlled by the computer, and the logistics robot equipment is used to carry out the handling and transportation of the goods, so as to realize the sending and receiving, storage and distribution of materials. Control system for picking and distribution.

3.1.3 Carrier

Objects handled by logistics robots.

Note: Including but not limited to shelves, pallets, trucks, turnover boxes, etc.

3.1.4 Berth

The location on the map where the vehicle is stored.

3.2 Abbreviations

The following abbreviations apply to this document. IP. Internet Protocol (Internet Protocol) MTTR. Mean time between repairs between failures (MeanTimeToRepair)

4.2 System Design

The logistics robot information system design conforms to.

a) It should support (7×24)h continuous trouble-free operation;

b) After restarting, it should support continued normal operation and automatically return to the operating state before restarting;

c) The number of logistics robots that should support the expansion of the management side;

d) It should support to increase the business capacity of moving goods by adding related hardware;

e) It should support extended storage capacity without affecting business operation;

f) It should support the addition of business functions by upgrading software, system expansion and adding external connection equipment;

g) It should have the function of switching between the main machine and the standby machine. When the main machine running in the system is abnormal, it can automatically switch to the standby machine to continue running.

5 Functional Requirements

5.1 Management Subsystem

5.1.1 Map Management
5.1.1.1 Map Configuration

The map configuration function should conform to.

a) Support adding, modifying, exporting, importing and deleting maps;

b) Support adding multiple maps;

c) Support the preservation, query and restoration of historical maps;

d) Supports simultaneous editing, modification and deletion of multiple associated maps.

5.1.1.2 Map Editing

The map editing function conforms to.

a) It should support map drawing by topology or grid;

b) It should support editing information such as points, roads and areas of the map, and the information should include location coordinates or location identification information, element types, etc.

Attribute, map element type classification shall comply with the provisions of Table A.1 in Appendix A;

c) It should support operations such as expanding, reducing, and adjusting the map on the original map;

d) It should support the setting of one-way or two-way driving directions of the road;

e) It should be supported to set whether the road allows logistics robots to bypass obstacles;

f) It should support the configuration of the running speed of the logistics robot according to the map area;

g) It should support the drawing of straight lines, oblique lines, arcs and Bezier curves;

h) It is advisable to support the configuration of safety schemes such as the laser scheme of logistics robots according to the map area;

i) It is advisable to support the configuration of the access type of logistics robots according to the map area;

j) It should support the labeling, editing, and traffic management logic adjustment of the associated areas between multiple maps.

5.1.2 Robot Management

The logistics robot management function conforms to.

a) It should support the registration of the logistics robot to the system and the cancellation from the system, and the authority control should be carried out during registration/deregistration operations;

b) The logistics robot should be supported to be added to the corresponding operation map, which should include the logistics robot number, name, type, guide, etc. Attribute information such as flight mode and size;

c) It should support operations such as modifying, deleting, importing and exporting the attribute information of logistics robots;

d) It should support the remote upgrade operation of the logistics robot equipment program;

e) It should support exception handling operations for logistics robots.

5.1.3 External device management
5.1.3.1 Automatic Door Configuration

The automatic door configuration function should meet.

a) Support the configuration of the specific location information of the automatic door in the map;

b) Support the configuration of the communication address information of the automatic door, such as IP address, port, etc.;

c) Supports operations such as modification and deletion of automatic door configuration information.

5.1.3.2 Air shower door configuration

The air shower door configuration function should meet.

a) Support the configuration of the specific location information of the air shower door in the map;

b) Support the configuration of the communication address and other information of the air shower door, such as IP address, port, etc.;

c) Support the configuration of the number of robots that can enter the air shower door at the same time;

d) Supports operations such as modifying and deleting the configuration information of the air shower door.

5.1.3.3 On-site (factory) road traffic signal management

The management function of road traffic lights in the field (factory) shall meet the following requirements.

a) Support the information configuration of the associated area of the traffic light equipment in the map;

b) Support adding traffic light control plan, the content of the plan should include the scope of the area, the start time of the plan execution, the execution time of the plan End time, and support to modify, delete, enable, disable operations on the plan;

c) Support the configuration of communication address information of traffic lights, such as IP address, port, etc.;

d) Supports operations such as modifying and deleting traffic light configuration information.

5.1.3.4 Pager Management

The pager management function shall conform to.

a) Support the configuration of the communication address information of the pager, such as IP address, port, etc.;

b) Support the configuration, modification and deletion of the functions of the pager buttons;

c) support the configuration of the presentation mode indicated by the pager device;

d) Supports operations such as modification and deletion of pager devices.

5.1.3.5 Hoist Management

The hoist management function shall comply with.

a) Support adding hoist, including adding hoist number, hoist floor number, hoist name, number of vehicles that can be accommodated by the hoist, Attribute information such as the number of hoist handover points and the coordinates of the hoist waiting point on each floor;

b) Support the configuration of the communication address information of the hoist, such as IP address, port, etc.;

c) Supports operations such as modifying, deleting, enabling, disabling the hoist.

5.1.3.6 Elevator Management

The elevator management function should meet.

a) Support adding elevators, including adding elevator number, elevator floor number, elevator name, elevator handover point number, elevator can accommodate vehicles Attribute information such as quantity, elevator waiting point coordinates of each floor, etc.;

b) Support the communication address information of the elevator, such as IP address, port, etc.;

c) Support to modify, delete, enable, disable and other operations on the elevator.

5.1.4 Task Management
5.1.4.1 Task execution

The task execution function should conform to.

a) Support receiving tasks and generating tasks through external interfaces;

b) The logistics robot task status is reported, and the task status is updated in time;

c) The task status can be notified to the third-party program through the interface;

d) Multi-task concurrent execution processing;

e) Support multi-point handling tasks and execute them in sequence.

5.1.4.2 Task query

System task information should include number, task type, task status, logistics robot number, created user name, task creation time, task status.

Task development execution time, task completion time, task start coordinates, destination coordinates, task priority, task handling object information and current task task execution progress, etc.

The system task information should include the vehicle number, the direction of the vehicle, the required completion time of the task, and the expected completion time of the task, etc.

5.1.4.3 Task Intervention

The task intervention function should meet.

a) Ability to adjust the priority of tasks to be executed;

b) Can cancel an ongoing task;

c) Can resend canceled tasks;

d) Ability to force task status to complete.

5.1.5 Vehicle Management
5.1.5.1 Vehicle Configuration

The system should add vehicles by type, and should include information such as vehicle type, vehicle number, vehicle size, etc., and should support modification, deletion, Batch import, batch export and other operations.

5.1.5.2 Vehicle Status Management

The vehicle state management function shall conform to.

a) Supports manual freezing of the vehicle. After freezing, the system will not carry the vehicle, and supports the thawing operation;

b) Support to record whether the vehicle is in the locked state, that is, if the vehicle is locked as the transportation target by the task executed by the system, the state will be changed It is locked and supports real-time updates;

c) Support query by vehicle type, vehicle number, locked state, frozen state, storage slot number and other information.

Note: The vehicle status record form includes attribute information such as vehicle number, vehicle type, storage slot number where the vehicle is located, vehicle locked status, and vehicle frozen status.

5.1.5.3 Vehicle Storage Management

It should support the definition of different storage strategies for different types of vehicles, that is, different types of vehicles can be stored in different areas.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

Similar standards

How to Download GB/T 41402-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41402-2022

$330.00