GB/T 41323-2022Corrosion control engineering life cycle—Terminology (English PDF)
腐蚀控制工程全生命周期 术语
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41323-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41323-2022 is the English-translated version of 腐蚀控制工程全生命周期 术语.
GB/T 41323-2022 fixes the vocabulary of the life cycle of corrosion control engineering. It defines the terms used from the design of the protection through its construction, its operation and inspection to the end of the life of the structure, so that the same word means the same thing in a specification, a report and a contract.
It applies to corrosion control engineering of every kind. Design institutes, corrosion protection contractors and asset owners use it. Issued on 9 March 2022, it has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 41323-2022
National Standard of the People's Republic of China
- ICS
- 25.220.99
- Classification
- A 01
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Basic terminology
- 3.2 Guidelines for Management Work
- 3.3 Professional technical supervision
- 3.4 Intelligent operation
- 3.5 Risk Assessment
- 3.6 Cathodic Protection
- Reference
- index
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
1 Scope
This document defines terms and definitions for the full life cycle of corrosion control engineering. This document applies to all types of corrosion control engineering.
2 Normative references
There are no normative references in this document.
3 Terms and Definitions
3.1 Basic terminology
3.1.1 Corrosion
Damage or deterioration of materials by the action of the environment.
Note: Environmental effects include physical, chemical and electrochemical effects.
3.1.2 Corrosionsource
A single factor or combination of factors that causes or causes corrosion. [Source: ISO 23123:2020, 3.2]
3.1.3 A general term for various media directly involved in corrosion reactions
Note: The medium includes hydrogen ions in acid, oxygen in water, ferric ions, etc.
3.1.4 Corrosion conditions
The general term for various working conditions that affect the corrosion reaction.
3.1.5 Workingconditions
It is a general term for various factors that characterize the operating state of the main project and have a direct impact on the occurrence, development and destruction of corrosion.
Note: The working conditions include the concentration, temperature, flow rate, pressure of the corrosive medium, as well as the stress, structure, galvanic couple, heat-affected zone, etc. of the device and facility.
3.1.6 Environmental factors
The general term for environmental factors that affect corrosion control engineering.
Note: Environmental factors include resistivity, pH value, stray current, temperature, humidity, oxygen concentration, etc.
3.1.7 Corrosion control
Artificial intervention in the corrosion system to reduce corrosion damage.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 41323-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 41323-2022
$300.00