GB/T 41266-2022Security testing methods for critical network devices—Switch (English PDF)
网络关键设备安全检测方法 交换机设备
This is a limited preview
Buy now to download the full PDF (37 pages)
Need quotation for your management?
Get a formal quotation for GB/T 41266-2022 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2022
Implementation date
October 1, 2022
Scope
GB/T 41266-2022 is the English-translated version of 网络关键设备安全检测方法 交换机设备.
GB/T 41266-2022 gives the security testing methods for the switches listed in the catalogue of critical network devices.
It sets out how each security function is tested - device identification, redundancy, backup, recovery and anomaly detection, the management of vulnerabilities and backdoors, the security of the pre-installed software and of its updates, the security of the default state, the resistance to common attacks, user identification and authentication, access control, log audit, communication security and data security - and the methods by which the security assurance requirements are evaluated.
It applies to the switches in the catalogue, gives network operators a basis for buying them and guides their development and testing. Issued on 9 March 2022, it has applied since 1 October 2022.
Found what you need?
Document preview — GB/T 41266-2022
National Standard of the People's Republic of China
- ICS
- 35.040
- Classification
- L 80
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Abbreviations
- 5 Test environment
- 6 Safety detection method
- 6.1 Device Identification Security
- 6.2 Redundancy, Backup Recovery and Anomaly Detection
- 6.3 Vulnerability and Defect Management Security
- 6.4 Pre-installed software startup and update security
- 6.5 Default state security
- 6.6 Ability to resist common attacks
- 6.7 User Identification and Authentication
- 6.8 Access Control Security
- 6.9 Log Audit Security
- 6.10 Communication Security
- 6.11 Data Security
- 7 Methods of assessing safety and security requirements
- Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.
GB 40050-2021 "General Requirements for Network Critical Equipment Security" and GB/T 41267-2022 "Security Technical Requirements for Network Critical Equipment" Switch equipment security standard system for key equipment.
1 Scope
This document specifies the security, redundancy, backup recovery and anomaly detection, loopholes and deficiencies of the switch equipment included in the network key equipment.
Trap management, pre-installed software startup and update security, default state security, ability to resist common attacks, user identification and authentication security, access Security detection methods for control security, log audit security, communication security, data security, etc., and specify the security requirements for the above equipment. Ask for an evaluation method.
This document is applicable to the switch equipment listed in the network key equipment catalogue, and can also provide the basis for network operators to purchase switch equipment.
According to the data, it is also suitable for guiding the research and development and testing of switch equipment.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document.
GB/T 25069 Information Security Technical Terminology
GB/T 41268-2022 Network key equipment security detection method router equipment
3 Terms and Definitions
The terms and definitions defined in GB/T 25069 and the following apply to this document.
3.1 Switch
A device that utilizes an internal switching mechanism to provide connectivity between networked devices.
NOTE: Switching mechanisms in switches are usually implemented at layer 2 or layer 3 of the OSI reference model.
4 Abbreviations
The following abbreviations apply to this document. ACL. Access Control List (AccessControlList)
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 41266-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 25069-2022 — Information security techniques—Terminology
GB/T 41268-2022 — Security testing methods for critical network devices—Router
GB/T 7251.4-2026 — Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
Secure payment via Stripe
Payments accepted
GB/T 41266-2022
$530.00