Valid

GB/T 41263-2022Industrial control system dynamic reconfiguration active defense technical architecture specification (English PDF)

工控系统动态重构主动防御体系架构规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (21 pages)

Need quotation for your management?

Get a formal quotation for GB/T 41263-2022 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

March 9, 2022

Implementation date

October 1, 2022

Scope

GB/T 41263-2022 is the English-translated version of 工控系统动态重构主动防御体系架构规范.

GB/T 41263-2022 sets the technical architecture of dynamic reconfiguration active defence for industrial control systems.

It describes the information security architecture of the industrial control network and then its parts: the polymorphic deployment of a heterogeneous compiling environment at the process monitoring layer, the secure transmission within the control network, the heterogeneous execution logic at the field control layer, and the intelligent checking and secure storage of the engineering files; it also fixes the parameters by which the security of the whole system is evaluated.

It is addressed to everyone building endogenous security into an industrial control system and guides their design work. Issued on 9 March 2022, it has applied since 1 October 2022.

Found what you need?

Document preview — GB/T 41263-2022

National Standard of the People's Republic of China

ICS
35.240.50
Classification
J 07

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Symbols and Abbreviations
  • 5 Dynamic Reconstruction Active Defense Architecture of Industrial Control System
  • 5.1 Overview
  • 5.2 Process monitoring layer heterogeneous compilation environment polymorphic deployment
  • 5.3 Industrial Control Network Information Security Transmission Mechanism
  • 5.4 Heterogeneous operation logic and intelligent decision mechanism of on-site control layer
  • 5.5 Project File Secure Storage Verification Mechanism
  • 6 Specifications of Information Security Evaluation Index Parameters
  • Reference

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" drafted.

1 Scope

This document specifies the information security architecture of the industrial control network, describes the process monitoring layer heterogeneous compilation environment polymorphic deployment, industrial control network Information security transmission mode, heterogeneous operation logic of on-site control layer, intelligent judgment and security storage verification mechanism of engineering files, which stipulates information security System-wide evaluation index parameters.

This document is applicable to all industrial control system participants aiming to build endogenous security protection capabilities, and design activities for relevant participants.

Provide guidance requirements for dynamic reconstruction of active defense industrial control networks.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Industrial control system

An automated control system composed of computers and industrial process control components.

Note 1.Industrial control system is referred to as "industrial control system". Through the industrial communication line, the system connects the controller, sensor, execution The device is connected with the input/output interface and other parts to construct an industrial manufacturing system with automatic control capability.

Note 2.ICS is a general term that includes control systems used in a variety of industrial production, including SCADA, DCS and other smaller control systems such as PLC, is now widely used in the industrial sector and critical infrastructure. See GB/T 32919-2016 for more discussion of this concept.

3.2 Industrial control network

A communication network that connects all industrial production equipment and automation control systems using various communication devices.

Note: Industrial control network is the network part in ICS, referred to as "industrial control network".

3.3 A digitally operated electronic system for use in an industrial environment

Note 1.This system uses programmable memory as an internal register for user instructions to complete specified functions, such as logic, sequence, timing, counting, operation etc., control various types of machinery or processes through digital or analog input/output. The design of PLC and its related peripheral equipment enables it to It is easy to integrate into ICS and can easily achieve all the desired functions.

Note 2.See GB/T 33008.1-2016 for more discussion of this concept.

3.4 Supervisory control and data acquisition system

Using computer, communication and screen display technology to realize the data acquisition, control and protection functions of the production process, using communication technology to realize A multi-computer monitoring system for data sharing.

Note 1.The main features of the decentralized control system are decentralized functions, centralized operation and display, and data sharing. According to the specific situation, it can also be a dispersion in hardware arrangement.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.

Similar standards

How to Download GB/T 41263-2022

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
21 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 41263-2022

$240.00