Valid

GB/T 40970-2021Determination of ammonia in cosmetics—Titration method (English PDF)

化妆品中氨含量的测定 滴定法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40970-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 26, 2021

Implementation date

June 1, 2022

Scope

GB/T 40970-2021 is the English-translated version of 化妆品中氨含量的测定 滴定法.

GB/T 40970-2021 gives a titration method for measuring the ammonia content of cosmetics. The sample is treated with barium chloride and extracted with methanol, the filtrate is distilled under alkaline conditions, and the ammonia released is collected in boric acid solution and titrated with standard hydrochloric acid.

The standard lists the reagents, including magnesium oxide and methyl red and bromocresol green indicators, and covers apparatus, procedure, calculation, recovery and precision.

It applies to hair dyes, perm products and other cosmetics to which ammonia is added as gas or aqueous ammonia, but not to products containing ammonium raw materials other than cetrimonium chloride and stearyl trimethyl ammonium chloride.

Detection and quantification limits are 0.1% and 0.2% as NH3. It was issued on 26 November 2021 and has applied since 1 June 2022.

Found what you need?

Document preview — GB/T 40970-2021

National Standard of the People's Republic of China

ICS
71.100.70
Classification
Y 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle
  • 5 Reagents and materials

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

1 Scope

This document describes the principles, reagents and materials, equipment, test procedures, test data processing, and methods for determining ammonia content in cosmetics. Recovery rate, precision, etc.

This document is applicable to the determination of ammonia content added in the form of ammonia gas or ammonia in cosmetics such as hair dye products and perm products.

This document does not apply to products added with ammonium raw materials (except cetrimonium chloride and stearyl trimethyl ammonium chloride).

The detection limit of ammonia (calculated as NH3) in this document is 0.1%, and the limit of quantification is 0.2%.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 601 Preparation of Standard Titration Solution for Chemical Reagents

Preparation of preparations and products used in GB/T 603 chemical reagent test method

3 Terms and definitions

There are no terms and definitions that need to be defined in this document.

4 Principle

After the sample is treated with barium chloride, it is extracted with methanol, filtered or centrifuged, and the filtrate (or supernatant) is heated and distilled under alkaline conditions and evaporated The ammonia is collected in the boric acid absorption solution and titrated with a standard hydrochloric acid titration solution.

5 Reagents and materials

Unless otherwise specified, only use analytical reagents.

5.1 Ammonia-free water is prepared in accordance with GB/T 603.

5.2 Methanol.

5.3 Barium chloride solution (25g/100mL). Weigh 25g of barium chloride, add water to dissolve and dilute to 100mL.

5.4 Magnesium oxide.

5.5 Boric acid solution (20g/L). Weigh 20g of boric acid, add water to dissolve and dilute to 1000mL.

5.6 Hydrochloric acid standard titration solution (0.1mol/L). prepared and calibrated in accordance with GB/T 601, or commercially available reagents can be purchased.

5.7 Methyl red ethanol solution (1g/L). Weigh 0.1g of methyl red, dissolve it in 95% ethanol, dilute with 95% ethanol to 100mL, at room temperature save.

5.8 Bromocresol green ethanol solution (1g/L). Weigh 0.1g of bromocresol green, dissolve it in 95% ethanol, dilute with 95% ethanol to 100mL, Keep warm. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 40970-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40970-2021

$105.00