GB/T 40926.4-2021Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers (English PDF)
冰球运动护具 第4部分:守门员的头部和面部护具
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40926.4-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
November 26, 2021
Implementation date
November 26, 2021
Scope
GB/T 40926.4-2021 is the English-translated version of 冰球运动护具 第4部分:守门员的头部和面部护具.
GB/T 40926.4-2021 is the Chinese standard "Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers". Its scope clause reads: This document, combined with GB/T 40926.1, GB/T 40926.2, and GB/T 40926.3, specifies the head and face protection of ice hockey goalkeepers Performance requirements and test methods.
The reasonable performance confirmed in this document is as follows. a) Materials, assembly and design; b) Protected area (range) and penetration resistance; c) Shock absorption performance; d) Resistance to ice hockey impact; e) Wearing device performance; f) Optical performance.
Note 1.The requirements of the clause take precedence over the graphics. Note 2.The purpose of this document is to reduce the damage to the goalkeeper's head and face without compromising the competitive state and appeal of ice hockey. risk. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 40926.4-2021
National Standard of the People's Republic of China
- Classification
- Y 55
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 4.1 General
- 4.2 Design
- 4.3 Protected area (covered area)
- 4.4 Penetration resistance
- 4.5 Shock absorption performance
- 4.6 Resistance to ice hockey impact
- 4.7 Wearable device performance
- 4.8 Field of view
- 5 Test method
- 5.1 General
- 5.2 Pre-treatment of samples
- 5.3 Positioning of protective gear wearing
- 5.4 Protection area (coverage area) test
- 5.5 Penetration resistance test
- 5.6 Shock absorption performance test
- 5.7 Ice hockey impact resistance test
- 6 Test report
- 7 Permanent identification
- 8 Product information
1 Scope
This document, combined with GB/T 40926.1, GB/T 40926.2, and GB/T 40926.3, specifies the head and face protection of ice hockey goalkeepers
Performance requirements and test methods.
The reasonable performance confirmed in this document is as follows.
a) Materials, assembly and design;
b) Protected area (range) and penetration resistance;
c) Shock absorption performance;
d) Resistance to ice hockey impact;
e) Wearing device performance;
f) Optical performance.
Note 1.The requirements of the clause take precedence over the graphics.
Note 2.The purpose of this document is to reduce the damage to the goalkeeper's head and face without compromising the competitive state and appeal of ice hockey.
risk.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 40926.1-2021 Ice hockey protective gear Part 1.General requirements (ISO 10256-1.2016, IDT)
GB/T 40926.2-2021 Ice hockey protective gear Part 2.Head protective gear (ISO 10256-2.2016, IDT)
GB/T 40926.3-2021 Ice hockey protective gear Part 3.Face protective gear (ISO 10256-3.2016, IDT)
CSAZ262.6-14 Specifications forfacialyfeaturedheadform (Specificationsforfacialyfeaturedheadform)
3 Terms and definitions
GB/T 40926.1-2021, GB/T 40926.2-2021 and GB/T 40926.3-2021 and the following terms and definitions
Applies to this document.
3.1 Goalkeeper head and face protector; goalkeeper protector
A device used to protect the head and face of a goalkeeper in ice hockey.
Note. Examples include but are not limited to the following.
a) A skater helmet combined with full-face protective gear;
b) A mask consisting of.
1) Cover part of the lordosis of the head, face and chin;
2) Cover eye and facial devices (e.g. wire cage);
3) A removable back panel covering the back of the goalkeeper's head. […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 40926.1-2021Protective equipment for use in ice hockey - Part 1: General requirements
- GB/T 40926.2-2021Protective equipment for use in ice hockey - Part 2: Head protection for skaters
- GB/T 40926.3-2021Protective equipment for use in ice hockey - Part 3: Face protectors for skaters
ISO 10256
How to Download GB/T 40926.4-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 40926.1-2021 — Protective equipment for use in ice hockey - Part 1: General requirements
GB/T 40926.2-2021 — Protective equipment for use in ice hockey - Part 2: Head protection for skaters
GB/T 40926.3-2021 — Protective equipment for use in ice hockey - Part 3: Face protectors for skaters
GB/T 40926.4-2021
$185.00