GB/T 40926.2-2021Protective equipment for use in ice hockey - Part 2: Head protection for skaters (English PDF)
冰球运动护具 第2部分:头部护具
This is a limited preview
Buy now to download the full PDF (42 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40926.2-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
November 26, 2021
Implementation date
November 26, 2021
Scope
GB/T 40926.2-2021 is the English-translated version of 冰球运动护具 第2部分:头部护具.
GB/T 40926.2-2021 is the Chinese standard "Protective equipment for use in ice hockey - Part 2: Head protection for skaters". Its scope clause reads: This document specifies the performance requirements and test methods of head guards used in ice hockey.
The reasonable performance confirmed in this document is as follows. a) Structure and protection zone; b) Impact absorption performance; c) Penetration resistance; d) Wearing system performance; e) Field of view; f) Identification and information.
This document applies to head protection used by ice hockey players (including other staff except goalkeepers). Note 1.The requirements of the clause take precedence over the graphics.
Note 2.The purpose of this document is to reduce the risk of injury to the athlete's head without compromising the competitive state and appeal of ice hockey. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 40926.2-2021
National Standard of the People's Republic of China
- Classification
- Y 55
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Requirements
- 4.1 Harmlessness
- 4.2 Ergonomics
- 4.3 Annex
- 4.4 Protected area
- 4.5 Penetration resistance
- 4.6 Shock absorption performance
- 4.7 Wearing the device
- 4.8 Field of view
- 5 Test method
- 5.1 Sampling
- 5.2 Environmental processing temperature
- 5.3 Field of view
- 5.4 Helmet Wear Index (HPI)
- 5.5 Protected area
- 5.6 Penetration resistance test
- 5.7 Shock absorption performance test
- 5.8 Wearing system performance test
- 6 Test report
- 7 Permanent identification
- 8 Product information
- Appendix A (Normative) Drop impact test using guided free drop test device
- Appendix B (Normative) Single rail drop impact test
- Appendix C (informative) Visual field measurement method
1 Scope
This document specifies the performance requirements and test methods of head guards used in ice hockey.
The reasonable performance confirmed in this document is as follows.
a) Structure and protection zone;
b) Impact absorption performance;
c) Penetration resistance;
d) Wearing system performance;
e) Field of view;
f) Identification and information.
This document applies to head protection used by ice hockey players (including other staff except goalkeepers).
Note 1.The requirements of the clause take precedence over the graphics.
Note 2.The purpose of this document is to reduce the risk of injury to the athlete's head without compromising the competitive state and appeal of ice hockey.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 40926.1-2021 Ice hockey protective gear Part 1.General requirements (ISO 10256-1.2016, IDT)
ISO 6487 Road vehicles-Measurement technology instrument method (Roadvehicles-Measurement technology impacttests-Instrumentation)
EN960.2006 Headforms for use in the testing of protective helmets
3 Terms and definitions
The following terms and definitions defined in GB/T 40926.1-2021 apply to this document.
3.1 Drop height
The vertical distance between the lowest point (impact point) of the raised helmet and the impact surface of the drop test device.
3.2 Fastening system
A device used to connect the various parts of the helmet.
3.3 Fieldofvision
Wear the protective gear in a proper head model in the normal way, and measure the visual expansion area at the fixed pupil entrance of the eye.
GB/T 41526.1 | GB/T 20394 | GB 24429 | GB/T 40926.5 | GB/T 40926.4 | GB/T 40926.3 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 10256 · ISO 6487
How to Download GB/T 40926.2-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 40926.1-2021 — Protective equipment for use in ice hockey - Part 1: General requirements
GB/T 40926.3-2021 — Protective equipment for use in ice hockey - Part 3: Face protectors for skaters
GB/T 40926.4-2021 — Protective equipment for use in ice hockey - Part 4: Head and face protection for goalkeepers
GB/T 40926.2-2021
$360.00