GB/T 40924-2021Snowboard-boots - Interface with snowboard bindings (English PDF)
单板滑雪靴 滑雪板固定器接口
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40924-2021 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
November 26, 2021
Implementation date
November 26, 2021
Scope
GB/T 40924-2021 is the English-translated version of 单板滑雪靴 滑雪板固定器接口.
GB/T 40924-2021 — This document specifies the sole interface area of the snowboard boots and the ski boot main shaft for clamping the interface to ensure that it is firmly connected to the snowboard holder.
The size and characteristics of the fixed connection part. This document does not cover other possible devices for fixing snowboard boots on the snowboard. This document applies to snowboard boots with size 15.0 or greater in the world shoe size system. See ISO 5355 for alpine ski boots and GB/T 40930 for travel ski boots.
Found what you need?
Document preview — GB/T 40924-2021
National Standard of the People's Republic of China
- Classification
- Y 55
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 1 Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications)
- 3 Terms and definitions
- 4 requirements
- 4.1 Dimensions
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is equivalent to ISO 11634.1996 "Interface for Snowboard Holder for Snowboard Boots".
This document has made the following minimal editorial changes.
---Incorporate the content of the technical corrigendum of ISO 11634.1996/Cor.1.2007, and modify the English name of the document.
1 Scope
This document specifies the sole interface area of the snowboard boots and the ski boot main shaft for clamping the interface to ensure that it is firmly connected to the snowboard holder.
The size and characteristics of the fixed connection part.
This document does not cover other possible devices for fixing snowboard boots on the snowboard.
This document applies to snowboard boots with size 15.0 or greater in the world shoe size system.
See ISO 5355 for alpine ski boots and GB/T 40930 for travel ski boots.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
ISO 2768-1 General tolerances Part 1.Tolerances of linear and angular dimensions without tolerances (Generaltolerances-Part
1 Tolerancesforlinearandangulardimensionswithoutindividualtoleranceindications)
Note. GB/T 1804-2000 general tolerances, linear and angular tolerances without tolerances (eqvISO 2768-1.1989)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Interface
The connecting structure on the snowboard boots that enables the snowboard holder to function.
3.2
Longitudinal medianplane
The middle plane of the shoe sole is longitudinally perpendicular to the force-bearing surface.
3.3
Bearing surface
The surface of the sole connected to the plate on which the boot stands.
4 requirements
4.1 Dimensions
The size of snowboard boots should meet the requirements of Figure 1.
Unmarked tolerances shall comply with ISO 2768-1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
How to Download GB/T 40924-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 40924-2021
$105.00