Valid

GB/T 40910-2021Textiles—Evaluation for water resistance and water vapour permeability (English PDF)

纺织品 防水透湿性能的评定

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40910-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2021

Implementation date

May 1, 2022

Scope

GB/T 40910-2021 is the English-translated version of 纺织品 防水透湿性能的评定.

GB/T 40910-2021 sets out how to evaluate the water resistance and water vapour permeability of textiles.

It defines the property itself together with hydrostatic pressure, spray rating and water vapour transmission rate, and explains how to sample fabrics and finished products and how to cut representative specimens free of defects, stains and wrinkles, including specimens taken from the seam tape.

The tests rely on the hydrostatic pressure method of GB/T 4744, the spray test of GB/T 4745, the washing and drying procedures of GB/T 8629 and the water method of GB/T 12704.2, and the results lead to an evaluation and identification step and a test report.

It applies to all types of fabrics and their products. It was issued on 11 October 2021 and has applied since 1 May 2022.

Found what you need?

Document preview — GB/T 40910-2021

National Standard of the People's Republic of China

ICS
59.080.30
Classification
W 04

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Terms and definitions4
  • 4 Sampling and sample preparation5
  • 5 Test methods5
  • 6 Evaluation and identification6
  • 7 Test report7
  • References8

1 Scope

This document specifies the terms and definitions, test methods, evaluation and identification for water resistance and water vapour permeability of textiles.

This document applies to all types of fabrics and their products.

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the version corresponding to that date is applicable to this document; for undated references, the latest version (including all amendments) is applicable to this document.

GB/T 4744, Textiles - Testing and evaluation for water resistance - Hydrostatic pressure method

GB/T 4745, Textiles - Testing and evaluation for water resistance - Spray test method

GB/T 8629-2017, Textiles - Domestic washing and drying procedures for textile testing

GB/T 12704.2-2009, Textiles - Test method for water-vapour transmission of fabrics - Part 2: Water method

3 Terms and definitions

The following terms and definitions are applicable to this document.

3.1 Water resistance and water vapour permeability

The performance of the sample to resist wetting and permeation by water, and to allow water vapour to escape.

Note: The water resistance and water vapour permeability of the sample is generally characterized by hydrostatic pressure, spray rating and water vapour transmission rate.

3.2 Hydrostatic pressure

The pressure per unit area of a sample when it is permeated by liquid water.

3.3 Spray rating

The degree to which a fabric surface resists wetting by water. [Source: GB/T 4745-2012, 3.2]

3.4 Water vapour transmission rate

The mass of water vapour passing through the unit area of the sample vertically within the specified time, under the condition of keeping the specified temperature and humidity on both sides of the sample, in grams per square meter hour [g/(m2·h)] or grams per square meter 24 hours [g /(m2·24h)]. [Source: GB/T 12704.2-2009, 3.1]

4 Sampling and sample preparation

4.1 The method and quantity of sample collection shall be carried out according to the product standard. For fabrics, each full-width fabric of more than 1.5 m cut, during sampling, shall be more than 15 cm from the edge of the fabric, and more than 2 m from the edge shall be avoided; for products, it shall be at least 2 units.

Note: The unit can be pieces, sets, strips, etc.

4.2 Cut representative samples -- which meet the test requirements of hydrostatic pressure, spray rating and water vapour transmission rate -- from the item. The samples shall avoid defects, stains and wrinkles that affect the test results. For products, samples for hydrostatic pressure shall be taken from different fabrics that meet the test requirements; samples for hydrostatic pressure at the seam shall be taken from the seam tape at the flat part. […]

5 Test methods

5.1 Hydrostatic pressure

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 40910-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40910-2021

$105.00