Valid

GB/T 40897-2021Determination of alkali sulfides and alkaline earth sulfides in cosmetics—Methylene blue spectrophotometric method (English PDF)

化妆品中碱金属硫化物和碱土金属硫化物的测定 亚甲基蓝分光光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40897-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

November 26, 2021

Implementation date

June 1, 2022

Scope

GB/T 40897-2021 is the English-translated version of 化妆品中碱金属硫化物和碱土金属硫化物的测定 亚甲基蓝分光光度法.

GB/T 40897-2021 is the Chinese national method for measuring alkali metal sulfides and alkaline earth metal sulfides in cosmetics by methylene blue spectrophotometry.

In an acid medium the sulfides release hydrogen sulfide, which a nitrogen stream carries off; the sulfide ion then reacts with N,N-dimethyl-p-phenylenediamine in the presence of ferric ions to form methylene blue, read at a wavelength of 665 nm.

The standard sets out the principle, reagents and materials, equipment, test procedure, data processing, recovery rate and precision, and the result is expressed as total sulfur.

It applies to hair removal cosmetics such as lotions, creams and emulsions, with a detection limit of 3 mg/kg and a limit of quantification of 10 mg/kg. It was issued on 26 November 2021 and has applied since 1 June 2022.

Found what you need?

Document preview — GB/T 40897-2021

National Standard of the People's Republic of China

ICS
71.100.70
Classification
Y 42

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle
  • 5 Reagents and materials

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

Introduction

This document only provides methods to detect the total amount of sulfur in alkali metal sulfides and alkaline earth metal sulfides in cosmetics. Because these two types of sulfides There are many varieties, and they have different limits in cosmetics. When the test results are obtained according to this document, it is necessary to comprehensively consider the makeup to determine whether it exceeds the standard.

The ingredients indicated on the product label and the raw material sampling records provided by the cosmetics manufacturer shall be determined.

1 Scope

This document describes the principles and tests of the methylene blue spectrophotometric method for the determination of alkali metal sulfides and alkaline earth metal sulfides in cosmetics.

Reagents and materials, equipment, test procedures, test data processing, recovery rate, precision, etc.

This document is applicable to the determination of alkali metal sulfide and alkaline earth metal sulfide content in hair removal cosmetics such as lotions, creams and emulsions.

In this document, the detection limit of alkali metal sulfide and alkaline earth metal sulfide (in terms of sulfur) is 3mg/kg, and the limit of quantification is 10mg/kg.

2 Normative references

The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 601 Preparation of Standard Titration Solution for Chemical Reagents

GB/T 6682 Analytical laboratory water specifications and test methods

3 Terms and definitions

There are no terms and definitions that need to be defined in this document.

4 Principle

In an acid medium, alkali metal sulfides and alkaline earth metal sulfides generate hydrogen sulfide gas, and the hydrogen sulfide is taken out with a nitrogen stream to generate Sulfide ion reacts with N,N-dimethyl-p-phenylenediamine in an acidic solution in the presence of ferric ion to form methylene blue, which is determined at a wavelength of 665nm

5 Reagents and materials

Unless otherwise specified, only use analytical reagents.

5.1 Water, GB/T 6682, level three.

5.4 Sodium hydroxide.

5.7 Soluble starch.

5.9 Iodine.

5.2 Sulfuric acid

rho(H2SO4)=1.84g/mL. […]

5.3 Hydrochloric acid

rho(HCl)=1.19g/mL, excellent grade pure. […]

5.5 N,N-Dimethyl-p-phenylenediamine hydrochloride

[NH2C6H4N(CH3)2·2HCl] […]

5.6 Ferric ammonium sulfate

[Fe(NH4)(SO4)2·12H2O] […]

5.8 Zinc acetate

[Zn(CH3COO)2·2H2O] […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 40897-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40897-2021

$135.00