Valid

GB/T 40814-2021Intelligent manufacturing—Customization—Capability maturity model (English PDF)

智能制造 个性化定制 能力成熟度模型

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40814-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2021

Implementation date

May 1, 2022

Scope

GB/T 40814-2021 is the English-translated version of 智能制造 个性化定制 能力成熟度模型.

GB/T 40814-2021 sets out a capability maturity model for customization in manufacturing, the production model in which a company reshapes parts of the product life cycle around the individual needs of its customers.

It defines five maturity levels, from planned and specification through integration and optimization to leadership, and groups the practices to be assessed into process areas covering the customization strategy of the organization, human resources, equipment and energy management, product quality, safety and environmental protection.

For each practice, from demand interaction, product and process design and process optimization to procurement, production scheduling and operation, warehousing, distribution and after-sales service, it describes what a company has to achieve at every level.

Manufacturers use it to evaluate how mature their customization capability is. It was issued on 11 October 2021 and has applied since 1 May 2022.

Found what you need?

Document preview — GB/T 40814-2021

National Standard of the People's Republic of China

ICS
35.240.50
Classification
L 67

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • 1 Scope4
  • 2 Normative references4
  • 3 Terms and definitions4
  • 4 Abbreviations5
  • 5 Capability maturity model6
  • 5.1 General6
  • 5.2 Capability maturity level6
  • 5.3 PA7
  • 5.4 Requirements for BP in PA8
  • 5.5 Requirements for GP in PA13

1 Scope

This document specifies the capability maturity model for customization.

This document is applicable to evaluate the maturity of the manufacturing enterprise's customization capability.

2 Normative references

There are no normative references in this document.

3 Terms and definitions

The following terms and definitions are applicable to this document.

3.1 Customization

A production service model, where the organization reconstructs one or more links in the product life cycle and system level based on the individual needs of customers, and meets the individual needs of customers through large-scale production methods under the constraints of cost, quality, delivery cycle, production efficiency, laws and regulations, etc.

3.2 Capability maturity model

A model for measuring the capability maturity of an organization, including a series of characteristics, attributes, indicators or patterns that represent capabilities and progress.

Note: The capability maturity model provides a reference benchmark for the organization to measure the capability level of its current practices, processes and methods, and sets clear improvement goals. [Source: GB/T 37988-2019, 3.7, modified]

3.3 Process area

A set of interrelated or interacting activities that utilize inputs to achieve a desired result.

5 Capability maturity model

5.4 Requirements for BP in PA

5.4.1.2 BP02 human resource management

Human resource management is a key factor in realizing customization. Empower people to match the organization's level of customization through the training of personnel, the realization of skill acquisition methods, and the improvement of skill levels.

a) Planned level Be able to determine the human capabilities required for building a customization environment;

b) Specification level Be able to provide the means for personnel to acquire corresponding capabilities;

c) Integration level Be able to conduct continuous education or training for personnel based on the development needs for customization;

d) Optimization level Be able to analyze the capability level of existing personnel through the information system, so that the skill level of personnel and the development level of customization can be improved simultaneously;

e) Leadership level Establish an incentive mechanism to enable existing personnel to acquire the skills required for customization in more fields and continuously improve their own capabilities.

5.4.2 PA02 resource management
5.4.2.1 BP03 equipment management

Equipment digitization is the basis of customization; equipment management means achieving remote online management and early warning of equipment through the digital transformation of equipment and full life cycle management.

a) Planned level Be able to use information technology to realize the daily management of some equipment, and start to consider the digital transformation of equipment;

b) Specification level Continue to carry out digital transformation of equipment, and be able to use information technology to realize equipment status management;

c) Integration level Be able to use the equipment management system to realize the full life cycle management of equipment, and be able to remotely monitor key equipment in real time;

d) Optimization level The digital transformation of equipment has been basically completed; be able to enable experts to remotely diagnose equipment online; has established the operating model of key equipment;

e) Leadership level Be able to carry out predictive maintenance on equipment based on knowledge base and big data analysis.

5.4.2.2 BP04 energy management

Energy management refers to utilizing information technology to standardize the organization's energy management and optimizing the use of energy and resources through energy management factors such as energy planning, energy operation scheduling, energy statistics, and carbon asset management, to reduce energy consumption and improve energy efficiency of the organization.

a) Planned level Start the informatization of energy management and realize the collection and monitoring of some energy data;

b) Specification level Be able to collect and count the main energy data through the information management system;

5.4.3.2 BP06 safety and environmental protection

Safety and environmental protection means - through the establishment of an effective management platform - informationizing the safety and environmental management process, collecting, monitoring, analyzing and utilizing data, to establish a knowledge base to optimize safety operations and environmental governance.

a) Planned level Information technology has been adopted for risk, hidden danger, emergency and other safety management and environmental protection data monitoring and statistics, etc.;

b) Specification level Be able to realize the information management of the whole process from clean production to terminal treatment;

c) Integration level Assist safety management through the establishment of safety training, typical hidden danger management, emergency management and other knowledge bases; carry out real-time online monitoring of all environmental pollution points, integrate monitoring data with production and equipment data, and give early warning of pollution sources exceeding the standard;

d) Optimization level Support multi-source information fusion, establish an emergency command center, and carry out emergency response through the expert database; establish an environmental protection governance model and optimize it in real time, and generate an environmental protection optimization plan online;

e) Leadership level Based on the knowledge base, support safe operation analysis and decision-making, and realize integrated management of safe operation and risk control; use big data to automatically predict the overall environmental conditions of all pollution sources, and automatically formulate and implement treatment plans based on real-time production equipment, pollution prevention and control equipment and other data.

5.5 Requirements for GP in PA

5.5.1 PA04 demand interaction

Sales management is to establish a platform for the interaction between supply and demand through information technology, so that manufacturing companies can understand customer needs in a timely and accurate manner, provide a basis for customization, and finally realize accurate demand forecasting through big data analysis and other technologies, to guide enterprises to realize customized production according to different needs of users.

a) Planned level Sales operations shall be managed through an information system.

b) Specification level Realize the whole sales process management through the information system, and strengthen the customer relationship management.

c) Integration level Integrate sales and production, warehousing and other businesses, to realize the individual needs of customers to drive production, procurement and logistics planning.

d) Optimization level Apply the knowledge model to optimize customer demand forecasting and formulate more accurate sales plans. Integrate all sales methods through the e-commerce platform to realize automatic adjustment of procurement, production and logistics plans according to the individual needs of customers. The whole life cycle management of products shall be provided through the mobile client, to realize full traceability of products.

e) Leadership level Big data and machine learning technologies shall be used to analyze the sales data and consumer behavior data of e-commerce platforms, and continuously optimize the sales forecasting model. Apply the e-commerce platform to realize the whole process management from personalized sales to payment collection.

5.5.2.2 GP03 process design

Carry out process design by means of process knowledge accumulation, excavation, and reasoning; use advanced technology tools, to make the production process suitable for discrete manufacturing.

a) Planned level According to design experience, carry out computer-aided process planning and process design, and establish the correlation between product design and process design data.

b) Specification level Realize the simulation of key links in process design and the internal collaboration of process design.

c) Integration level Realize computer-aided three-dimensional process design and simulation optimization, and realize information interaction and parallel collaboration between process design and product design.

d) Optimization level A process model including tooling model, tool model and equipment model shall be established based on the product design model, and the complete process information shall be integrated into the 3D digital model. A complete process design and management system shall be established to realize the unified management of the process and structure of 3D process design, with functions such as version management, authority control, and electronic approval. Realize the process design and simulation based on the process knowledge base, and realize the collaboration between process design and manufacturing.

e) Leadership level The auxiliary process innovation reasoning and online independent optimization shall be realized based on the knowledge base. The dynamic collaboration of information such as design, process, manufacturing, inspection, operation and maintenance shall be realized based on big data. A design service platform shall be established relying on advanced technologies such as big data and artificial intelligence based on the knowledge base, to realize multi-field, multi-region, and cross-platform comprehensive collaboration around the industrial chain, and provide instant process design services.

5.5.2.3 GP04 process optimization

Process optimization also adopts the methods of process knowledge accumulation, excavation, and reasoning, and uses optimization platforms and other technologies to realize the optimal matching of process routes, parameters, etc., with output, energy consumption, materials, equipment, etc., and meet customers' customization needs with low consumption and high efficiency. Process optimization applies to process manufacturing.

a) Planned level Be equipped with a process model and parameters that meet national/industry standards.

b) Specification level The production process shall run stably and meet requirements for site, safety, environment, and quality.

c) Integration level A unit-level process optimization model shall be established to provide corresponding optimization schemes for abnormal data information on site. Based on the existing process parameters, process optimization shall be realized by comprehensively considering yield, quality, energy consumption, environmental protection, operating conditions, and material balance.

d) Optimization level A process optimization model for the whole process shall be established. A process optimization knowledge base for the whole process shall be formed. The whole process optimization shall be realized based on the process optimization model and knowledge base.

e) Leadership level Establish a complete three-dimensional digital simulation model to complete the digital simulation of the entire production process. Based on advanced information technologies such as big data analysis and artificial intelligence, realize real-time online optimization of processes according to the individual needs of different customers.

5.5.3 PA06 procurement management

Material procurement is making enterprises achieve economical and reasonable inventory to meet the requirements of flexible production through the automatic perception, prediction and reasonable control of inventory, customer demand, production plan, etc.

5.5.4.2 GP07 production operation

Production operation is to effectively combine production materials, machines and other production elements and production processes in the best way to form linkage operations and continuous production to achieve maximum production results and economic benefits.

a) Planned level Be equipped with automated and digitalized equipment and production lines, with on-site control system.

b) Specification level Be able to use informatization means to send electronic documents such as various processes and operation instructions to the production unit, so as to realize the data collection of personnel, machines, materials and other resources.

c) Integration level Be able to realize the business integration of resource management, process route, production operation, warehousing and distribution, collect and store real-time data information of the production process, and provide real-time updated analysis results of the manufacturing process.

d) Optimization level The three-dimensional electronic operation guidance, operating parameters and production instructions in the production process shall be automatically sent to the digital equipment through information system integration. Enterprises shall realize the automatic collection and online optimization of production operation data, and adjust the production process, workstations and production line layout according to the optimization results. According to the different customization needs of customers, enterprises shall establish information systems to optimize on-site management decisions.

e) Leadership level The simulation of the whole production process shall be realized based on big data technology, and the production operation model shall be optimized to meet the individualized and flexible production needs. A production command center shall be established to realize visual monitoring of the production site and guide production operations. Smart devices, Internet of Things and big data technologies shall be used to realize unmanned or less-humanized production operations.

5.5.5 PA08 logistics management
5.5.5.1 GP08 warehousing and distribution

Warehousing and distribution refers to the storage and logistics of materials in the factory, the use of identification and recognition technology, automated transmission lines, information management methods, etc., to realize the identification and classification of raw materials, semi-finished products, etc., data collection, transportation and storage location management, and automatically complete the pick-up and delivery tasks of parts.

a) Planned level Be able to realize the inventory and inventory management of raw materials, intermediate goods, and finished products based on the information management system.

b) Specification level Be able to use barcode, two-dimensional code, RFID, etc. to realize the digital identification of raw materials, intermediate goods, finished products, etc.

5.5.6 PA09 after-sales service

Product service is to use technologies such as data mining and intelligent analysis to capture and analyze the individual needs of users, provide services to users more actively, accurately and efficiently, and develop in the direction of on-demand and active services.

a) Planned level Set up a product service department to manage customer demand information for products through information technology.

b) Specification level Be equipped with a standardized product service management system, conduct product service management through the information system, and feedback product service information to relevant departments to guide product process improvement. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 40814-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40814-2021

$180.00