Valid

GB/T 40648-2021Intelligent manufacturing—Virtual factory reference architecture (English PDF)

智能制造 虚拟工厂参考架构

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 40648-2021 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 11, 2021

Implementation date

May 1, 2022

Scope

GB/T 40648-2021 is the English-translated version of 智能制造 虚拟工厂参考架构.

GB/T 40648-2021 sets out a reference architecture for the virtual factory used in intelligent manufacturing, meaning a modelling platform that maps the physical factory and can simulate, manage and control its key elements.

The architecture has three layers above the physical layer: an interconnection layer that exchanges information in real time, a model layer built on the virtual factory information model, and an application layer.

It then describes the business functions a virtual factory supports during factory operation: design simulation, process planning, production test and product delivery.

It is meant to guide developers, solution providers and users in building and applying virtual factories. It was issued on 11 October 2021 and has applied since 1 May 2022.

Found what you need?

Document preview — GB/T 40648-2021

National Standard of the People's Republic of China

ICS
35.240.50
Classification
L 67

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Virtual Factory Reference Architecture
  • 4.1 General
  • 4.2 Interconnection layer
  • 4.3 Model layer
  • 4.4 Application layer
  • 5 Virtual factory business functions
  • 5.1 Design Simulation
  • 5.2 Process planning
  • 5.3 Production test
  • 5.4 Product delivery

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

Introduction

With the gradual advancement of intelligent manufacturing standardization and the development of digital twin technology, more attention has been paid to the construction of virtual factories. For the truth The unification of virtual factory construction nowadays is very important to standardize the related content of virtual factory.

A unified virtual factory reference architecture helps developers, system solution providers, and users of different virtual factories to establish Unify the understanding of the plant construction process, and carry out subsequent integrated development and use.

1 Scope

This document specifies the content of different levels in the virtual factory reference architecture, as well as the different business functions of the virtual factory.

This document is suitable for guiding the development and application of virtual factories.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 40654-2021 Intelligent Manufacturing Virtual Factory Information Model

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Virtual factory

A modeling platform that maps the physical factory and has the functions of simulating, managing and controlling the key elements of the physical factory.

4 Virtual Factory Reference Architecture

4.1 General

The virtual factory reference architecture should be a three-tier architecture including interconnection layer, model layer, and application layer, and interact and update with the physical layer in real time.

The physical layer and the model layer can realize real-time information interaction through the interconnection layer, and establish a dynamic update mechanism. Different functions in the application layer It can be realized by combining the multi-level model relationships of different models. This document focuses on the product life cycle in the operation and maintenance stage of the factory Content, the virtual factory function in the application layer is specified. The virtual factory reference architecture is shown in Figure 1.

The virtual factory should build a virtual factory information model based on the actual situation of the physical factory. The actual content of the physical factory should be a virtual factory The overall basis of the reference architecture.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 40648-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 40648-2021

$90.00