GB/T 40422-2021General technical requirements of converging wireless sensor networks and mobile communication network (English PDF)
无线传感器网络与电信网络结合的总体技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40422-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
February 1, 2022
Scope
GB/T 40422-2021 is the English-translated version of 无线传感器网络与电信网络结合的总体技术要求.
GB/T 40422-2021 sets out the overall technical requirements for combining wireless sensor networks (WSN) with telecommunication networks.
It establishes the network architecture of the combined system, describes its functional entities and service requirements, and specifies requirements for the gateway, WSN nodes, the access and core networks, the service platform and the management platform.
Functional requirements cover access control, naming and identification, the IP protocol, node mobility management and multi-gateway operation, while management requirements address the platforms, the sensor network, WSN gateways and nodes.
It defines terms such as short-range wireless communication, wireless sensor network and wireless sensor node. It applies to the applications and services provided by such combined networks and to the related networks and equipment. It was issued on 11 October 2021 and has applied since 1 February 2022.
Found what you need?
Document preview — GB/T 40422-2021
National Standard of the People's Republic of China
- ICS
- 33.060
- Classification
- M 36
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 3.1 Terms and definitions
- 3.2 Abbreviations
- 4 Network overview
- 4.1 Network Architecture
- 4.2 Network functional entity
- 5 Business needs
- 6 Network and network functional entity requirements
- 6.1 Gateway
- 6.2 WSN Node
- 6.3 Access network and core network
- 6.4 Business Platform
- 6.5 Management platform
- 7 Functional requirements
- 7.1 Access Control
- 7.2 Naming and marking
- 7.3 IP protocol
- 7.4 Node mobility management
- 7.5 Multi-gateway mode
- 8 Management function requirements
- 8.1 Management platform
- 8.2 Business Platform
- 8.3 Wireless Sensor Network
- 8.4 WSN Gateway
- 8.5 WSN Node
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard establishes a network architecture that combines wireless sensor networks and telecommunication networks, describes functional entities and business requirements, and specifies Technical requirements such as network and network functional entity requirements, functional requirements, and management functional requirements.
This standard applies to applications and services provided by the combination of wireless sensor networks and telecommunication networks, as well as related networks and equipment.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.
IETFRFC4919 IPv6 Low-Power Personal Area Network. Overview, Assumptions, Problem Statement and Goals [IPv6overLow-Power WirelessPersonalAreaNetworks(6LoWPANs). Overview, assumptions, problemstatement, and goals]
oneM2MTS-0001 Functional architecture (Functionalarchitecture)
3 Terms, definitions and abbreviations
3.1 Terms and definitions
The following terms and definitions apply to this document.
3.1.1 Short-range wireless communication
The communication sender and receiver transmit information through radio waves, and the transmission distance is limited to a short range (usually within 100 meters, typical The distance is within 10m).
3.1.2 Wireless sensor networks; WSN
A multi-hop self-organizing network system formed by a group of wireless sensor node devices through wireless communication.
Note: The purpose of the network is to cooperatively sense, collect and process the information of the sensing objects in the network coverage area and send it to the observer.
3.1.3 Wireless sensor node
A micro-embedded system powered by a limited battery with relatively weak processing, storage and communication capabilities.
Note: The wireless sensor node is generally composed of four parts. sensor module, processor module, wireless communication module and energy supply module. The sensor module is responsible for Information collection and data conversion in the monitoring area; the processor module is responsible for controlling the operation of the entire sensor node, storing and processing the data collected by itself And data sent by other nodes; the wireless communication module is responsible for wireless communication with other sensor nodes, exchange control messages, and send and receive collected data. The energy supply module provides the energy required for the operation of the sensor nodes, usually using micro-batteries.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 40422-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 40422-2021
$210.00