Valid

GB/T 44183-2024Technical requirements and measurement methods for mobile terminals supporting BeiDou—Radiated RF performance (English PDF)

支持北斗的移动终端性能技术要求及测量方法 空间射频性能

Open the GB/T 44183-2024 preview as PDF

Preview — first pages of GB/T 44183-2024 (full document: 19 pages)

This is a limited preview

Buy now to download the full PDF (19 pages)

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 29, 2024

Implementation date

October 1, 2024

Scope

GB/T 44183-2024 is the English-translated version of 支持北斗的移动终端性能技术要求及测量方法 空间射频性能.

GB/T 44183-2024 is the Chinese national standard covering technical requirements and measurement methods for mobile terminals supporting BeiDou, Radiated RF performance. Issued on 29 June 2024, it has been in force since 1 October 2024.

Document preview — GB/T 44183-2024

National Standard of the People's Republic of China

ICS
33.060
Classification
M 36

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • PrefaceIII
  • 1 Scope1
  • 2 Normative references1
  • 3 Terms, definitions and abbreviations1
  • 4 Technical Requirements2
  • 5 Test conditions3
  • 6 General measurement method for radiated power3
  • 7 General measurement method for receiver performance3
  • Appendix A (Normative) Beidou Positioning Receiver Performance Measurement Method7
  • Appendix B (Normative) Linearization Method10
  • Appendix C (Normative) Sensitivity calculation method12
  • Appendix D (Informative) Autonomous Satellite Positioning Test Message Format13

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document was proposed by the Ministry of Industry and Information Technology of the People's Republic of China.

This document is under the jurisdiction of the National Communications Standardization Technical Committee (SAC/TC485).

This document was drafted by: China Academy of Information and Communications Technology, Yantai Zhuge Software Technology Co., Ltd., China Unicom Group Co., Ltd.

Company, China Mobile Communications Group Co., Ltd., China Telecom Group Co., Ltd., Coreray Microelectronics (Kunshan) Co., Ltd., Qualcomm Wireless Communications Technology (China) Co., Ltd., MediaTek Bodong Technology (Beijing) Co., Ltd., OPPO Guangdong Mobile Communications Co., Ltd., Vivo Mobile Communications Co., Ltd.

Ltd., Lenovo (Beijing) Co., Ltd., Beijing Honor Terminal Co., Ltd., Shenzhen Sailun Beidou Technology Co., Ltd., Spirent Communications Technology (Beijing) Co., Ltd., National Radio Monitoring Center Testing Center, Shenzhen Information and Communication Research Institute, ZTE Corporation, Guangdong Province Communication Terminal Product Quality Supervision and Inspection Center, Huawei Terminal Co., Ltd., Kunshan Ruixiang Xuntong Communication Technology Co., Ltd., Beijing Huawei Lichuangtong Technology Co., Ltd., Shenzhen Yidajietong Testing Technology Co., Ltd., Shanghai Yike Communication Technology Co., Ltd., Beijing University of Posts and Telecommunications, Shenzhen University, Hefei University of Technology, Sina Communication (Beijing) Technology Co., Ltd., Core Wireless (Beijing) Communication Technology Co., Ltd., Boding Shihua (Beijing) Technology Co., Ltd., Nanchang University, and Ruimaster (Shenzhen) Technology Co., Ltd.

The main drafters of this document are: Zhang Qinjuan, Dai Xun, Zhang Weiwei, An Xudong, Chen Xiaochen, Gao Lu, Han Bin, Kou Li, Liu Xiaoyu, Li Deqiang, Zhang Zhi, Liu Qifei, Xing Jinqiang, Wang Ruixin, Zhao Deng, Pan Zheng, Yuan Congzeng, Liu Zheng, Huang Rui, Zhu Qingyi, He Wei, Tang Lei, Ye Yang, Mu Jiasong, Shao Wei, Shao Song, Dong Kefang, Xiao Hai, He Ping, Chen Bo, Zhang Yunyun, Xie Yuming, Lü Cheng, Ma Lei, Sun Dong, Tian Mengchuan, Wang Huaqing, Liu Yuanan, Wang Weimin, Wu Yongle, Yuan Tao, Huang Wen, Shi Yang, Zheng Haixia, Ma Zhigang, Liu Guanghui, Liu Xianhui, Yang Meng, Wang Na, Jing Huanhuan, Sun Siyang, Gao Zhanyuan, Zhu Siting, Chen Xinyue, Yi Xuan, Wang Yuhao, and Ma Xin.

Technical requirements for mobile terminal performance supporting Beidou Measurement Methods Spatial RF Performance

1 Scope

This document specifies the spatial RF performance requirements for BeiDou-enabled mobile terminals and describes their measurement methods.

This document is applicable to the design of mobile communication terminals that support Beidou or are compatible with Beidou fusion positioning and wireless terminals used in fixed locations.

R&D, production and inspection and testing.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document.

YD/T 1484.1-2023 Measurement methods for radio frequency radiated power and receiver performance of wireless terminals Part 1: General requirements 3GPPTS37.571-1V16.11.0(2021-12) Universal Terrestrial Radio Access (UTRA) and Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC) User Equipment (UE) Positioning Conformance Specification Part 1: Conformance Test Specification [U- testspecification] UTRA) and Evolved Packet Core (EPC) User Equipment (UE) Positioning Conformance Specification Part 5: Test Scenarios and Assistance Data

3 Terms, definitions and abbreviations

3.1 Terms and Definitions

The terms and definitions defined in YD/T 1484.1-2023 apply to this document.

3.2 Abbreviations

The following abbreviations apply to this document. EUT. Equipment Under Test

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Editions of GB/T 44183

EditionTitleRevisionStatus
GB/T 44183-2024Technical requirements and measurement methods for mobile terminals supporting BeiDou - Radiated RF performancecurrent editionCurrent

This page sells the current edition, GB/T 44183-2024. Earlier editions are listed for reference only.

How to Buy GB/T 44183-2024

  1. 1Add to cart. Click the "Buy GB/T 44183-2024" button on this page. You can add more standards before checkout.
  2. 2Checkout. Enter your email and billing details. Payment is processed securely by Stripe (cards, Apple Pay, Google Pay supported).
  3. 3Instant delivery (0–9 sec). Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
  4. 4Invoice included. A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 44183-2024

$335.00

$285.00for partners