GB/T 40139-2021Measuring method for surface areas of materials—Three dimensional area measurement base on hyperspectral imaging (English PDF)
材料表面积的测量 高光谱成像三维面积测量法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 40139-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 21, 2021
Implementation date
September 1, 2021
Scope
GB/T 40139-2021 is the English-translated version of 材料表面积的测量 高光谱成像三维面积测量法.
GB/T 40139-2021 describes how to measure the three-dimensional surface area of a material using hyperspectral imaging.
It gives two methods, one with a rotating-platform area measuring instrument and one with a handheld instrument, each with its reagents and materials, apparatus, sample pretreatment, measurement, expression of results and precision, while annexes deal with the calibration of both instruments.
Terms such as surface area, structured light system, 3D data reconstruction, triangular patch and point cloud are defined. The method applies to food contact materials, jewellery and other materials, but not to porous materials with holes under 1 mm in diameter or to materials with strip textures under 1 mm. It was issued on 21 May 2021 and has applied since 1 September 2021.
Found what you need?
Document preview — GB/T 40139-2021
National Standard of the People's Republic of China
- ICS
- 71.040.50
- Classification
- G 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Principle
- 5 The first method rotating platform area measuring instrument method
- 5.1 Reagents and materials
- 5.2 Apparatus and equipment
- 5.3 Sample pretreatment
- 5.4 Measurement
- 5.5 Expression of analysis results
- 5.6 Precision
- 6 The second method handheld area measuring instrument method
- 6.1 Reagents and materials
- 6.2 Instruments and equipment
- 6.3 Sample pretreatment
- 6.4 Measurement
- 6.5 Expression of analysis results
- 6.6 Precision
- Appendix A (informative) Instrument diagram
- Appendix B (Normative) Calibration and Confirmation of Rotating Platform Area Measuring Instrument
- Appendix C (Informative) Three-dimensional graphics of typical samples
- Appendix D (Normative) Hand-held device accuracy calibration
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.
1 Scope
This document specifies a method for measuring the surface area of materials based on hyperspectral imaging technology.
This document is applicable to the measurement of the surface area of food contact materials, jewelry and other materials.
This document does not apply to porous materials with a hole diameter of less than 1mm, and materials containing strip textures with a diameter of less than 1mm.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Surface area
The sum of the area of all three-dimensional graphics surfaces.
3.2 Hyperspectral imaging
Combining imaging technology and spectroscopy technology to detect the two-dimensional space and spectral information of the target, and obtain high-resolution continuous, narrow-band Image data.
3.3 Structured light system
A group of system structures composed of projectors and cameras.
Note: The system uses a projector to project specific light information on the surface of the object and after the background, which is collected by the camera. According to the light signal change caused by the object, calculate Information such as the position and depth of the object, and then restore the entire three-dimensional space.
3.4 3D data reconstruction technology
Based on the data images of scenes and objects obtained through the camera, the images are analyzed and processed, and then combined with computer vision knowledge to derive Three-dimensional information of objects in the real environment.
3.5 Triangular patch
In the computer-simulated three-dimensional space, a triangular grid is composed of three points in the space coordinate system.
3.6 Point cloud
A collection of points that express the spatial distribution of the sample and the characteristics of the surface of the sample in a computer-simulated three-dimensional space.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 40139-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 40139-2021
$210.00