GB/T 40086-2021Synthetic ice rink—General technical requirements and test methods (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

Introduction

As a green and environmentally friendly product, the simulation ice rink is convenient and fast to maintain, and is not restricted by geographical location and climatic conditions, which is beneficial to Promote use nationwide. With the approach of the 2022 Beijing Winter Olympics and the strong support of local government departments for ice and snow sports, imitating The real ice rink is bound to be promoted vigorously, so quality assurance is also imperative. In view of the lack of current national standards for simulated ice rinks, specially formulated This standard provides a more rigorous technical and regulatory basis for the construction of simulated ice rinks.

1 Scope

This document specifies the terms and definitions, requirements, test methods, signs and instructions for the simulated ice rink (hereinafter referred to as "ice rink").

This document is applicable to the training, teaching, amateur competition and entertainment of ice sports such as ice hockey, free skating, figure skating, etc. Ice rink.

This document does not apply to professional training and professional competition ice rinks.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 1033.1-2008 Determination of the density of plastic non-foam plastics Part 1: Immersion method, liquid pycnometer method and titration method

GB/T 1034 Determination of Water Absorption of Plastics

GB/T 1036 Determination of the coefficient of linear expansion of plastics at -30°C~30°C Quartz dilatometer method

GB/T 1043.1-2008 Determination of impact properties of plastic simply supported beams Part 1: Non-instrumented impact test

GB/T 1634.2-2019 Determination of plastic load deformation temperature Part 2: Plastics and hard rubber

GB/T 2411 Use a hardness tester to determine the indentation hardness (Shore hardness) of plastics and hard rubber

GB/T 2918 Standard environment for condition adjustment and testing of plastic samples

GB/T 5296.1 Instructions for Use of Consumer Products Part 1: General Provisions

GB/T 5296.7 Instructions for Use of Consumer Goods Part 7: Sports Equipment

GB/T 5478-2008 Plastic rolling wear test method

GB/T 26125-2011 Six restricted substances in electrical and electronic products (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers) Determination of

3 Terms and definitions

The following terms and definitions apply to this document.