GB/T 39765-2021Determination of benzene,methylbenzene,ethylbenzene,dimethybenzene in stationery—Gas chromatographic method (English PDF)
文具中苯、甲苯、乙苯及二甲苯的测定方法 气相色谱法
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39765-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
March 9, 2021
Implementation date
October 1, 2021
Scope
GB/T 39765-2021 is the English-translated version of 文具中苯、甲苯、乙苯及二甲苯的测定方法 气相色谱法.
GB/T 39765-2021 is the Chinese national method for determining benzene, toluene, ethylbenzene and xylene in stationery by gas chromatography. It gives the principle, the reagents, the apparatus, the preparation and extraction of the sample, the chromatographic conditions, the identification and quantification, the calculation and the test report.
It applies to correction fluids and tapes, writing instruments, paints for drawing, adhesives and the other stationery listed, where these solvents are restricted because children use the articles.
Stationery makers, retailers and testing laboratories use it. Issued on 9 March 2021, it has applied since 1 October 2021.
Found what you need?
Document preview — GB/T 39765-2021
National Standard of the People's Republic of China
- ICS
- 71.040.40
- Classification
- Y 50
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents and materials
- 5 Equipment
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the gas chromatography method for the determination of benzene, toluene, ethylbenzene and xylene content in stationery products.
This standard is applicable to the content of benzene, toluene, ethylbenzene and xylene in products such as altered stationery, writing stationery, painting paints, adhesive stationery, etc. Determination. This standard does not apply to product packaging.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 6682 Analytical laboratory water specifications and test methods
3 Principle
After the sample is prepared into a test sample, it is injected into the gas chromatograph. Benzene, toluene, ethylbenzene, xylene (o-xylene, m-xylene and p-xylene)
Benzene) is completely separated from the coexisting substances in the capillary chromatographic column, then measured with a hydrogen flame ionization detector and quantified with an external standard method.
4 Reagents and materials
Unless otherwise specified, the reagents used are all analytically pure, and the water is the first grade water specified in GB/T 6682.
4.1 Carrier gas
Nitrogen or helium, purity >=99.995%.
4.2 Auxiliary gas (septum purge and makeup gas)
Nitrogen with the same properties as carrier gas.
4.3 Calibration compound
Compounds used for calibration, such as benzene, toluene, ethylbenzene, xylene (o-xylene, meta-xylene, and p-xylene); the purity is at least 99% (Mass fraction) or known concentration.
4.4 Dilution solvent
The solvent used to dilute the sample does not contain any substances that interfere with the test. The purity is at least 99% (mass fraction) or known concentration.
Examples. solvent-based stationery uses ethyl acetate, n-hexane, acetone, etc.; water-based stationery uses methanol, acetonitrile, tetrahydrofuran, etc. Refer to Appendix A for solvent selection.
5 Equipment
5.1 Gas chromatograph
Equipped with a hydrogen flame ionization detector (FID).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 39765-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
GB/T 6682-2008 — Water for analytical laboratory use - Specification and test methods
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 39765-2021
$155.00