GB/T 39694-2020Hydrogenated acrylonitrile-butadiene rubber(HNBR)—General specification and evaluation procedure (English PDF)
氢化丙烯腈-丁二烯橡胶(HNBR) 通用规范和评价方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39694-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
November 1, 2021
Scope
GB/T 39694-2020 is the English-translated version of 氢化丙烯腈-丁二烯橡胶(HNBR) 通用规范和评价方法.
GB/T 39694-2020 is the Chinese standard "Hydrogenated acrylonitrile-butadiene rubber(HNBR)—General specification and evaluation procedure".
Its scope clause reads: This standard specifies the classification, naming and designation, requirements, evaluation methods, inspection rules and signs, packaging, transportation and storage of hydrogenated acrylonitrile-butadiene rubber (hereinafter referred to as hydrogenated nitrile butadiene rubber, codenamed HNBR).
This standard applies to hydrogenated nitrile butadiene rubber made from acrylonitrile-butadiene rubber (hereinafter referred to as nitrile rubber) or modified nitrile rubber as raw materials, using solution catalytic hydrogenation.
Found what you need?
Document preview — GB/T 39694-2020
National Standard of the People's Republic of China
- ICS
- 83.060
- Classification
- G 35
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Symbols and abbreviations
- 4 Classification
- 5 Nomenclature and grades
- 6 Requirements
- 7 Evaluation methods
- 8 Inspection rules
- 9 Marking, packaging, transport and storage
3 Symbols and abbreviations
4 Classification
5 Nomenclature and grades
6 Requirements
7 Evaluation methods
8 Inspection rules
9 Marking, packaging, transport and storage
Foreword
This document was issued on 14 December 2020 by the State Administration for Market Regulation and the Standardization Administration of the People's Republic of China, and has been in force since 1 November 2021.
It is the first edition of this standard.
The document is under the responsibility of the China Petroleum and Chemical Industry Federation.
Classification: ICS 83.060, CCS G 35.
About this edition
GB/T 39694-2020 is the first edition of this standard. It was issued on 14 December 2020 and has been in force since 1 November 2021.
There is no earlier edition to compare it with, so a specification that has to refer to this subject can only cite GB/T 39694-2020 itself.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one from the record of the Standardization Administration.
Edition history and citation
GB/T 39694-2020 is a first edition: there is no earlier version of this standard, so a document that needs to refer to this subject can only cite GB/T 39694-2020 itself.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
GB/T 39694-2020 is classified under ICS 83.060, in the field of rubber and plastics industries. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.
Its Chinese Standard Classification code is CCS G 35. CCS is the domestic scheme, a letter for the sector and two digits for the subject within it, and it is the code by which the standard is filed and searched in China.
The GB/T prefix marks a recommended national standard. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it. In practice that covers most of the cases in which it will be read — a purchase specification, an inspection agreement or a certification scheme.
The document is under the responsibility of the China Petroleum and Chemical Industry Federation, which is the body that maintains it and that will answer a formal question about its interpretation.
How this standard is designated
The full designation is GB/T 39694-2020. A citation should carry the number with its year, because the year identifies the text that applies.
In a catalogue or a filing system it is found under ICS 83.060 and CCS G 35 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 39694-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 39694-2020
$210.00